Skip to main content

What are the setback requirements in NSW?

Written by Shea Cullen, architect, for Dudils.

Setbacks in NSW come from the council's development control plan (DCP) or, if you build as complying development, from the state codes. We have read the setbacks in the plans of all 128 NSW councils, and the Site Checker reads both sets for any address.

This page explains how they work and links every council's figures. It is a first look: the report for your address picks the plan that covers your lot.

Check your address

NSW addresses only. Free, and no sign up.

What is a setback?

A setback is the least distance a home must sit from a boundary of its lot: the front boundary to the street, the side boundaries to the neighbours, and the rear boundary. It keeps room for light, privacy, gardens and the street's character, and it decides how much of a lot a home can cover.

What is the front setback in NSW?

It is set by the council or by the complying development code, so it varies. Of the 121 councils whose main plan sets a front setback for a house, 19 ask for 6m, the most common single figure. As complying development the default front setback for a house is 4.5m on the 450m² lot, 4.5m on the 600m² lot and 6.5m on the 1,000m² lot, as the Site Checker reads the code.

What is the side setback in NSW?

It depends on the council and on the height of the wall. Of the 112 councils whose main plan sets a side setback for a house, 49 ask for 0.9m, the most common single figure, for a single storey house. As complying development it is 0.9m (1.5m at two storeys) on the 450m² lot, 0.9m (1.5m at two storeys) on the 600m² lot and 1.5m (2.1m at two storeys) on the 1,000m² lot. 66 councils' main plans set at least one different figure for a two storey house, and the page for each council gives both.

What is the rear setback in NSW?

It varies more than the front or side. Of the 110 councils whose main plan sets a rear setback for a house, 16 ask for 3m, the most common single figure, and 33 councils' main plans set at least one of their house setbacks by lot size. As complying development the rear setback for a house is 3m (8m at two storeys) on the 450m² lot, 3m (8m at two storeys) on the 600m² lot and 5m (12m at two storeys) on the 1,000m² lot.

How close to my boundary can I build?

As close as the setback for your lot and the kind of home allows. On a 600m² (15m wide, 40m deep) lot, a single storey house approved as complying development can sit 0.9m from a side boundary, as the Site Checker reads the code. Under a development application the council's plan decides, and the council can accept less where a design justifies it, or ask for more. A wall closer than 0.9m to a boundary also needs fire rated construction under the Building Code. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

Are setbacks different for complying development and a development application?

Yes. A complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, uses the state codes' setbacks, which turn on the lot's area and width and cannot bend. A development application (DA) is assessed against the council's development control plan (DCP), the council's own rules for the design of homes in its area, on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

How do setbacks work on a corner block?

A corner block has a front setback to its main street and a second setback to the side street. Of the 115 councils whose main plan sets a second street setback for a house, 35 ask for 3m, the most common single figure. As complying development the code sets the second street figure by lot size.

Why can my neighbours' homes change my front setback?

Because many councils want new homes to line up with the street. 60 councils' main plans set the front setback for a house as the average of the neighbouring homes, and 18 ask for at least a set figure or the street's established building line, the line the existing homes sit on, where that is further back. The report for your block shows the default and says when the neighbours can change it.

What are the setbacks for a house, a granny flat or a duplex?

Each home type has its own page with the complying development figures and every council's main figures.

What are my council's setbacks?

Every council has its own page with its main plan's figures for a house, a granny flat and a duplex, and its other plans. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

What else do people ask?

Do sheds, pergolas, pools and fences follow these setbacks?

No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

Can the council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Where do these setback figures come from?

The council figures are read from each council's published DCP or setback policy, and each council page links the plan and the clause. The complying development figures are the ones the Site Checker reads from the state codes for a lot's area and width.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block