Skip to main content

What are Murrumbidgee Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Murrumbidgee the setbacks for a house, a granny flat or a duplex come from Murrumbidgee Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Murrumbidgee Council's setbacks for a house?

Murrumbidgee Council's main plan, Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point), names a house but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.

House setbacks in Murrumbidgee gives the complying development figures and every other plan that covers one.

What are Murrumbidgee Council's setbacks for a granny flat?

Murrumbidgee Council's main plan, Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point), names a granny flat but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.

Granny flat setbacks in Murrumbidgee gives the complying development figures and every other plan that covers one.

What are Murrumbidgee Council's setbacks for a duplex?

Murrumbidgee Council's main plan, Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point), names a duplex but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.

Duplex setbacks in Murrumbidgee gives the complying development figures and every other plan that covers one.

Which DCP covers my block in Murrumbidgee?

It depends on the lot: we hold 12 plans with setbacks for homes in Murrumbidgee Council, and Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Murrumbidgee with setbacks for homes
PlanWhere it appliesHomes it covers
Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point)Main plan. Land zoned RU5 Village in the former Murrumbidgee Shire (the villages of Coleambally and Darlington Point), other than the River Red Gum Estate.house, granny flat, duplex
River Red Gum Estate DCP, Darlington PointThe River Red Gum Estate at Darlington Point (Young Street, Helena Parade, Edwards Street and Gugaa Street): Lots 1, 2, 8 to 12, 15, 17 to 27 and 30 to 55 DP1320116 and Lots 1 to 4 DP1330816 (the former Lots 13 and 14), zoned RU5 Village.house, granny flat
River Red Gum Estate DCP, Darlington Point (Lots 3 to 6, two storey lots)Lots 3, 4, 5 and 6 DP1320116 in the River Red Gum Estate, Darlington Point (RU5 Village): the lots on which the DCP considers two storey homes (cl 8(A)(a)), whose two storey setbacks are the Inland Code's. Houses and granny flats only: cl 9(B) lists Lots 7, 16, 28 and 29 for dual occupancies, so a duplex is not available here (cl 9(C) considers multi dwelling housing on these lots).house, granny flat
River Red Gum Estate DCP, Darlington Point (Lots 7, 16, 28 and 29, duplex lots)Lots 7, 16, 28 and 29 DP1320116 in the River Red Gum Estate, Darlington Point (RU5 Village): the four corner lots over 900 m2 on which the DCP considers dual occupancies (cl 9(B)).house, granny flat, duplex
Jerilderie DCP 2012, s 4.1 RU5 Village, Residential PrecinctLand zoned RU5 Village in the former Jerilderie Shire (Jerilderie town), other than the Commercial and Special Use precincts of DCP Schedule 5, which have their own traced outlines.house, granny flat, duplex
Jerilderie DCP 2012, s 4.2 RU5 Village, Commercial PrecinctThe Commercial precinct of the Jerilderie RU5 Village zone (DCP Schedule 5, green): the main street blocks on Jerilderie and Powell Streets.house, granny flat, duplex
Jerilderie DCP 2012, RU5 Village, Special Uses PrecinctThe Special Use precinct of the Jerilderie RU5 Village zone (DCP Schedule 5, yellow): hospital, school, church and community land.house, granny flat, duplex
Jerilderie DCP 2012, s 5 R5 Large Lot ResidentialLand zoned R5 Large Lot Residential in the former Jerilderie Shire (around Jerilderie town).house, granny flat, duplex
Show 4 more plans
Every plan in Murrumbidgee with setbacks for homes, continued
PlanWhere it appliesHomes it covers
Jerilderie DCP 2012, s 6 RU1 Primary ProductionLand zoned RU1 Primary Production in the former Jerilderie Shire.house, duplex
No DCP: Murrumbidgee LEP 2013, RU1 Primary ProductionLand zoned RU1 Primary Production in the former Murrumbidgee Shire (the farmland around Coleambally and Darlington Point).house, granny flat, duplex
No DCP: Murrumbidgee LEP 2013, R5 Large Lot ResidentialLand zoned R5 Large Lot Residential in the former Murrumbidgee Shire.house, granny flat, duplex
No DCP: Murrumbidgee LEP 2013, C3 Environmental ManagementLand zoned C3 Environmental Management in the former Murrumbidgee Shire (along the Murrumbidgee River).house

Do Murrumbidgee Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Murrumbidgee?

Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point) sets no separate setback for the second street of a corner block for a house, so ask the council how it treats one. Under complying development the code sets one by lot size.

What else do people ask?

Can Murrumbidgee Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Murrumbidgee setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Murrumbidgee Council's setbacks checked?

We last read Murrumbidgee Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block