Skip to main content

What are Leeton Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Leeton the setbacks for a house, a granny flat or a duplex come from Leeton Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Leeton Council's setbacks for a house?

Leeton Council's main plan, Leeton Comprehensive DCP 2022, Part D1 Urban + Village Dwellings and Part D2 Medium Density Housing, asks a single storey house for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 749.99m², no figure on lots up to 750m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m on lots up to 749.99m², no figure on lots up to 750m², 0.9m on larger lots; and rear 3m on lots up to 749.99m², no figure on lots up to 750m², 5m on larger lots.

House setbacks in Leeton gives the two storey figures, the clauses and every other plan that covers one.

What are Leeton Council's setbacks for a granny flat?

Leeton Council's main plan, Leeton Comprehensive DCP 2022, Part D1 Urban + Village Dwellings and Part D2 Medium Density Housing, asks a single storey granny flat for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 749.99m², no figure on lots up to 750m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m on lots up to 749.99m², no figure on lots up to 750m², 0.9m on larger lots; and rear 3m on lots up to 749.99m², no figure on lots up to 750m², 5m on larger lots.

Granny flat setbacks in Leeton gives the two storey figures, the clauses and every other plan that covers one.

What are Leeton Council's setbacks for a duplex?

Leeton Council's main plan, Leeton Comprehensive DCP 2022, Part D1 Urban + Village Dwellings and Part D2 Medium Density Housing, asks a single storey duplex for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 749.99m², no figure on lots up to 750m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m on lots up to 749.99m², no figure on lots up to 750m², 0.9m on larger lots; and rear 3m on lots up to 749.99m², no figure on lots up to 750m², 5m on larger lots.

Duplex setbacks in Leeton gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Leeton?

It depends on the lot: we hold 7 plans with setbacks for homes in Leeton Council, and Leeton Comprehensive DCP 2022, Part D1 Urban + Village Dwellings and Part D2 Medium Density Housing is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Leeton with setbacks for homes
PlanWhere it appliesHomes it covers
Leeton Comprehensive DCP 2022, Part D1 Urban + Village Dwellings and Part D2 Medium Density HousingMain plan. Land zoned R1 General Residential, R3 Medium Density Residential and RU5 Village (Leeton township, and the villages of Wamoon, Murrami and Whitton).house, granny flat, duplex
Leeton Comprehensive DCP 2022, Part D4 Large Lot Housing (R2 Low Density Residential)Land zoned R2 Low Density Residential: the edges of Leeton township and Yanco.house, granny flat, duplex
Leeton Comprehensive DCP 2022, Part D4 Large Lot Housing (R5 Large Lot Residential)Land zoned R5 Large Lot Residential around Leeton township.house, granny flat, duplex
Leeton Comprehensive DCP 2022, Part D5 Rural HousingLand zoned RU1 Primary Production.house, duplex
Leeton Comprehensive DCP 2022, Part D1 Urban + Village Dwellings (E2 Commercial Centre)Land zoned E2 Commercial Centre (Leeton town centre, the former B3 Commercial Core).house
Leeton Comprehensive DCP 2022 (C4 Environmental Living)Land zoned C4 Environmental Living (one strip north-east of Leeton township).house, granny flat, duplex
Leeton Comprehensive DCP 2022 (E1 Local Centre)Land zoned E1 Local Centre (the neighbourhood centres in Leeton and Yanco).granny flat

Do Leeton Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Leeton?

Leeton Comprehensive DCP 2022, Part D1 Urban + Village Dwellings and Part D2 Medium Density Housing sets a separate setback for a house from the second street, the side street of a corner block: 3m for one storey, 5m for second storey building elements on lots up to 749.99m²; no figure on lots up to 750m²; 4.5m for one storey, 6.5m for second storey building elements on larger lots (Part D1, D1.3 h, Table 4). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Leeton Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Leeton setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Leeton Council's setbacks checked?

We last read Leeton Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block