Skip to main content

What are Griffith Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Griffith the setbacks for a house, a granny flat or a duplex come from Griffith Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Griffith Council's setbacks for a house?

Griffith Council's main plan, Griffith Residential DCP 2020, Sections 4 and 5 (Zones R1, R3 and RU5), asks a single storey house for these setbacks: front 6m, side 0.9m and rear 2m.

House setbacks in Griffith gives the two storey figures, the clauses and every other plan that covers one.

What are Griffith Council's setbacks for a granny flat?

Griffith Council's main plan, Griffith Residential DCP 2020, Sections 4 and 5 (Zones R1, R3 and RU5), asks a single storey granny flat for these setbacks: front 6m, side 0.9m and rear 2m.

Granny flat setbacks in Griffith gives the two storey figures, the clauses and every other plan that covers one.

What are Griffith Council's setbacks for a duplex?

Griffith Council's main plan, Griffith Residential DCP 2020, Sections 4 and 5 (Zones R1, R3 and RU5), asks a single storey duplex for these setbacks: front 6m, side 0.9m and rear 2m.

Duplex setbacks in Griffith gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Griffith?

It depends on the lot: we hold 7 plans with setbacks for homes in Griffith Council, and Griffith Residential DCP 2020, Sections 4 and 5 (Zones R1, R3 and RU5) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Griffith with setbacks for homes
PlanWhere it appliesHomes it covers
Griffith Residential DCP 2020, Sections 4 and 5 (Zones R1, R3 and RU5)Main plan. Land in Zone R1 General Residential, Zone R3 Medium Density Residential and Zone RU5 Village, outside the Character Conservation Areas, the Collina Growth Area and the Lake Wyangan Growth Area.house, granny flat, duplex
Griffith Residential DCP 2020, s 4.8 Character Conservation AreasThe five Character Conservation Areas mapped in s 4.8: Carrathool / Hyandra Streets, Ortella Street, Lawford Crescent, Doolan Crescent, and Wood Road / Kelly Avenue, on residential land.house, granny flat, duplex
Griffith Residential DCP 2020, Collina Growth Area (s 12.1 and s 4.7.1 b)Residential land in the Collina Growth Area (Figures 41 and 42, s 12.1).house, granny flat, duplex
Griffith Residential DCP 2020, Lake Wyangan Growth Area (s 12.2 and s 4.7.1 b)RU5 Village land in the Lake Wyangan Growth Area (Figure 49, s 12.2).house, granny flat, duplex
Griffith Residential DCP 2020, Section 8 Large Lot Residential (Zone R5)Land in Zone R5 Large Lot Residential, including the R5 land in the Lake Wyangan Growth Area and the Boorga Road large lots of s 12.3.house, granny flat
Griffith DCP No. 1 Non-urban Development (Zones RU1, RU2 and RU4)Rural land in Zones RU1 Primary Production, RU2 Rural Landscape and RU4 Primary Production Small Lots, read as the successors of the old 1(a), 1(b) and 1(h) rural zones that DCP No. 1 names.house, granny flat, duplex
Griffith DCP No. 19 Mixed Development (Griffith CBD)The Griffith central business district: "the Business 3(a) Zone, as depicted in the map shown at Attachment A1" (the Banna Avenue circle and Banna Avenue east to Crossing Street, between the railway and the canal), on land now zoned E1 Local Centre or MU1 Mixed Use. Its Attachment B residential component sets the setbacks for homes in mixed development.house, granny flat, duplex

Do Griffith Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Griffith?

Griffith Residential DCP 2020, Sections 4 and 5 (Zones R1, R3 and RU5) sets a separate setback for a house from the second street, the side street of a corner block: 2m (Griffith Residential DCP 2020, s 4.7.1 Front Setbacks, Corner Lots, control e)). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Griffith Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Griffith setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Griffith Council's setbacks checked?

We last read Griffith Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block