Skip to main content

What are Murray River Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Murray River the setbacks for a house, a granny flat or a duplex come from Murray River Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Murray River Council's setbacks for a house?

Murray River Council's main plan, Murray DCP 2012, Chapter 2 Residential Development (R1 and RU5, former Murray Shire), asks a single storey house for these setbacks: front the average of the neighbouring homes (3m on lots up to 450m²; 4.5m on lots up to 1,000m²; 6.5m on lots up to 1,500m²; 8.5m on lots up to 1,800m²; 10m on larger lots where there are none); side left to the Building Code (0.9m) on lots up to 1,800m²; 3m on lots up to 4,000m²; 5m on larger lots; and rear left to the Building Code (0.9m) on lots up to 1,800m²; 5m on lots up to 4,000m²; 10m on larger lots.

House setbacks in Murray River gives the two storey figures, the clauses and every other plan that covers one.

What are Murray River Council's setbacks for a granny flat?

Murray River Council's main plan, Murray DCP 2012, Chapter 2 Residential Development (R1 and RU5, former Murray Shire), asks a single storey granny flat for these setbacks: front the average of the neighbouring homes (3m on lots up to 450m²; 4.5m on lots up to 1,000m²; 6.5m on lots up to 1,500m²; 8.5m on lots up to 1,800m²; 10m on larger lots where there are none); side left to the Building Code (0.9m) on lots up to 1,800m²; 3m on lots up to 4,000m²; 5m on larger lots; and rear left to the Building Code (0.9m) on lots up to 1,800m²; 5m on lots up to 4,000m²; 10m on larger lots.

Granny flat setbacks in Murray River gives the two storey figures, the clauses and every other plan that covers one.

What are Murray River Council's setbacks for a duplex?

Murray River Council's main plan, Murray DCP 2012, Chapter 2 Residential Development (R1 and RU5, former Murray Shire), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (3m on lots up to 450m²; 4.5m on lots up to 1,000m²; 6.5m on lots up to 1,500m²; 8.5m on lots up to 1,800m²; 10m on larger lots where there are none); side left to the Building Code (0.9m) on lots up to 1,800m²; 3m on lots up to 4,000m²; 5m on larger lots; and rear left to the Building Code (0.9m) on lots up to 1,800m²; 5m on lots up to 4,000m²; 10m on larger lots.

Duplex setbacks in Murray River gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Murray River?

It depends on the lot: we hold 12 plans with setbacks for homes in Murray River Council, and Murray DCP 2012, Chapter 2 Residential Development (R1 and RU5, former Murray Shire) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Murray River with setbacks for homes
PlanWhere it appliesHomes it covers
Murray DCP 2012, Chapter 2 Residential Development (R1 and RU5, former Murray Shire)Main plan. Land zoned R1 General Residential or RU5 Village under Murray LEP 2011 (the former Murray Shire: Moama, Mathoura, Bunnaloo, Womboota), outside the Rich River Golf Club.house, granny flat, duplex
Murray DCP 2012, Chapter 2 Residential Development (R2, former Murray Shire)Land zoned R2 Low Density Residential under Murray LEP 2011 (Moama).house, granny flat, duplex
Murray DCP 2012, Chapter 2 Residential Development (R5, former Murray Shire)Land zoned R5 Large Lot Residential under Murray LEP 2011 (Moama rural residential estates such as Perricoota Run and Kilkerrin Lakes).house, granny flat
Murray DCP 2012, Chapter 2 Residential Development (C3, former Murray Shire)Land zoned C3 Environmental Management under Murray LEP 2011.house
Murray DCP 2012, Chapter 2 Residential Development (RU1, former Murray Shire)Land zoned RU1 Primary Production under Murray LEP 2011.house, granny flat
Murray DCP 2012 (E1 Local Centre, former Murray Shire)Land zoned E1 Local Centre under Murray LEP 2011 (the former B2 Local Centre, Moama and Mathoura main streets).house, granny flat, duplex
Murray DCP 2012, Chapter 2, s 2.12 Rich River Golf ClubResidential lots within the Rich River Golf Club, Moama: the two community title schemes inside the club grounds, DP271393 (Stapleton Grove, Parslow Place, Rich River Drive; 52 lots) and DP270801 (Fairway View; 21 lots), zoned R1.house, granny flat, duplex
Wakool DCP 2013, Section B.1 Residential (R1 and RU5, former Wakool Shire)Land zoned R1 General Residential or RU5 Village under Wakool LEP 2013 (the former Wakool Shire: Barham, Moulamein, Tooleybuc, Koraleigh, Wakool, Murray Downs).house, granny flat, duplex
Show 4 more plans
Every plan in Murray River with setbacks for homes, continued
PlanWhere it appliesHomes it covers
Wakool DCP 2013, Section B.1 Residential (R5, former Wakool Shire)Land zoned R5 Large Lot Residential under Wakool LEP 2013.house, granny flat, duplex
Wakool DCP 2013, Section B.1 Residential (RU1, former Wakool Shire)Land zoned RU1 Primary Production under Wakool LEP 2013.house, granny flat
Wakool DCP 2013, Section B.1 Residential (E1 Local Centre, former Wakool Shire)Land zoned E1 Local Centre under Wakool LEP 2013 (the former B2 Local Centre).house, granny flat, duplex
Wakool DCP 2013, Section B.1 Residential (E3 Productivity Support, former Wakool Shire)Land zoned E3 Productivity Support under Wakool LEP 2013 (the former B6 Enterprise Corridor).duplex

Do Murray River Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Murray River?

Murray DCP 2012, Chapter 2 Residential Development (R1 and RU5, former Murray Shire) sets a separate setback for a house from the second street, the side street of a corner block: 2m on lots up to 450m²; 3m on lots up to 1,000m²; 3.5m on lots up to 1,800m²; 4m on lots up to 4,000m²; 5m on larger lots (Murray DCP 2012, Chapter 2, s 2.5 Building setbacks, Setbacks from secondary road (R1, R2, R5, RU5, E3)). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Murray River Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Murray River setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Murray River Council's setbacks checked?

We last read Murray River Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block