Skip to main content

What are Clarence Valley Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Clarence Valley the setbacks for a house, a granny flat or a duplex come from Clarence Valley Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Clarence Valley Council's setbacks for a house?

Clarence Valley Council's main plan, Clarence Valley Residential Zones DCP 2011, Part C (R1, R2, R3), asks a single storey house for these setbacks: front at least 6m, or the street's established building line where that is further back; side 0.9m; and rear 0.9m.

House setbacks in Clarence Valley gives the two storey figures, the clauses and every other plan that covers one.

What are Clarence Valley Council's setbacks for a granny flat?

Clarence Valley Council's main plan, Clarence Valley Residential Zones DCP 2011, Part C (R1, R2, R3), asks a single storey granny flat for these setbacks: front at least 6m, or the street's established building line where that is further back; side 0.9m; and rear 0.9m.

Granny flat setbacks in Clarence Valley gives the two storey figures, the clauses and every other plan that covers one.

What are Clarence Valley Council's setbacks for a duplex?

Clarence Valley Council's main plan, Clarence Valley Residential Zones DCP 2011, Part C (R1, R2, R3), asks a single storey duplex for these setbacks: front at least 6m, or the street's established building line where that is further back; side 0.9m; and rear 0.9m.

Duplex setbacks in Clarence Valley gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Clarence Valley?

It depends on the lot: we hold 11 plans with setbacks for homes in Clarence Valley Council, and Clarence Valley Residential Zones DCP 2011, Part C (R1, R2, R3) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Clarence Valley with setbacks for homes
PlanWhere it appliesHomes it covers
Clarence Valley Residential Zones DCP 2011, Part C (R1, R2, R3)Main plan. Land zoned R1 General Residential, R2 Low Density Residential or R3 Medium Density Residential under Clarence Valley LEP 2011 (Residential Zones DCP A3, C16.2), except where a site part of the DCP sets its own setbacks: Angourie (Part Q), Glenreagh (Part R) and Ulmarra (Part U) village R2/R3 land, the Yamba Shores canal lots in Schedule C1 item 2, and the lots on the northern side of Queens Lane, Iluka.house, granny flat, duplex
Clarence Valley Residential Zones DCP 2011, Part Q Angourie villageQ1: "all land in the village of Angourie zoned R2 Low Density and R3 Medium Density residential zones in the CV LEP 2011".house, granny flat, duplex
Clarence Valley Residential Zones DCP 2011, Part R Glenreagh villageR1: "land in the village of Glenreagh zoned R2 Low Density Residential in CV LEP 2011".house, granny flat, duplex
Clarence Valley Residential Zones DCP 2011, Part U Ulmarra villageU1: "land within the R2 Low Density Residential zone in CV LEP 2011 in Ulmarra Village".house, granny flat, duplex
Clarence Valley Residential Zones DCP 2011, Schedule C1 item 2 (Yamba Shores Estate canal lots)Lots in Yamba Shores Estate that take frontage to The Peninsula, The Anchorage, The Mainbrace, Mariners Way or Binnacle Court and have rear boundaries to the waterway in Lots 2 to 64 DP 1141129 (Schedule C1 item 2), on R1, R2 or R3 land.house, granny flat, duplex
Clarence Valley DCPs, Queens Lane Iluka (northern side)Land on the northern side of Queens Lane, Iluka, which backs onto the lane, zoned R3 (Residential Zones DCP C16.8) or SP3 (E and other zones DCP C17.3, C17.5).house, granny flat, duplex
Clarence Valley Residential Zones DCP 2011, Part C (R5 Large Lot Residential)Land zoned R5 Large Lot Residential under Clarence Valley LEP 2011 (C16.3), including Gulmarrad (Part S, which sets no lot setbacks of its own).house, granny flat, duplex
Clarence Valley Rural Zones DCP 2011, Part C (RU1, RU2)Land zoned RU1 Primary Production or RU2 Rural Landscape under Clarence Valley LEP 2011 (Rural Zones DCP A3, C5.1).house, granny flat, duplex
Show 3 more plans
Every plan in Clarence Valley with setbacks for homes, continued
PlanWhere it appliesHomes it covers
Clarence Valley Rural Zones DCP 2011, Part C (RU3 Forestry)Land zoned RU3 Forestry under Clarence Valley LEP 2011.house
Clarence Valley DCP Development in E and other zones 2011, Part C (C3 Environmental Management)Land zoned C3 Environmental Management under Clarence Valley LEP 2011 (E and other zones DCP A3, C17.4).house, duplex
Clarence Valley DCP Development in E and other zones 2011, Part C (SP3 Tourist)Land zoned SP3 Tourist under Clarence Valley LEP 2011 (E and other zones DCP A3, C17.1), including Yamba Hill SP3 land (Part P), except the lots on the northern side of Queens Lane, Iluka.house, granny flat, duplex

Do Clarence Valley Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Clarence Valley?

Clarence Valley Residential Zones DCP 2011, Part C (R1, R2, R3) sets a separate setback for a house from the second street, the side street of a corner block: 3.5m (Residential Zones DCP 2011, Part C, C16.5). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Clarence Valley Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Clarence Valley setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Clarence Valley Council's setbacks checked?

We last read Clarence Valley Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block