What are Glen Innes Severn Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Glen Innes Severn the setbacks for a house, a granny flat or a duplex come from Glen Innes Severn Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Glen Innes Severn Council's setbacks for a house?
Glen Innes Severn Council's main plan, Glen Innes Severn DCP 2014, Chapter 3 Residential Development: R1 and RU5, asks a single storey house for these setbacks: front the average of the neighbouring homes (6m where there are none), side 0.9m and rear 0.9m.
House setbacks in Glen Innes Severn gives the two storey figures, the clauses and every other plan that covers one.
What are Glen Innes Severn Council's setbacks for a granny flat?
Glen Innes Severn Council's main plan, Glen Innes Severn DCP 2014, Chapter 3 Residential Development: R1 and RU5, asks a single storey granny flat for these setbacks: front the average of the neighbouring homes (6m where there are none), side 0.9m and rear 0.9m.
Granny flat setbacks in Glen Innes Severn gives the two storey figures, the clauses and every other plan that covers one.
What are Glen Innes Severn Council's setbacks for a duplex?
Glen Innes Severn Council's main plan, Glen Innes Severn DCP 2014, Chapter 3 Residential Development: R1 and RU5, asks a single storey duplex for these setbacks: front the average of the neighbouring homes (6m where there are none), side 0.9m and rear 0.9m.
Duplex setbacks in Glen Innes Severn gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Glen Innes Severn?
It depends on the lot: we hold 9 plans with setbacks for homes in Glen Innes Severn Council, and Glen Innes Severn DCP 2014, Chapter 3 Residential Development: R1 and RU5 is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Glen Innes Severn DCP 2014, Chapter 3 Residential Development: R1 and RU5 | Main plan. Land zoned R1 General Residential (Glen Innes) and RU5 Village (Deepwater, Emmaville, Glencoe and the other villages), outside the R2 Hunter Street release area. | house, granny flat, duplex |
| Glen Innes Severn DCP 2014, Chapter 3 Residential Development and Chapter 4 Rural Development: R5 Large Lot Residential | Land zoned R5 Large Lot Residential (the rural residential land north and south of Glen Innes). | house, granny flat, duplex |
| Glen Innes Severn DCP 2014, Chapter 10 Hunter Street Urban Release Area (R2) | The Hunter Street Urban Land Release Area on the east edge of Glen Innes (MAP 1, "heavy black edging"), which s 10.2 says "is zoned R2 Low Density Residential". | house, granny flat, duplex |
| Glen Innes Severn DCP 2014, Chapter 4 Rural Development: RU1 Primary Production | Land zoned RU1 Primary Production. | house, duplex |
| Glen Innes Severn DCP 2014, Chapter 4 Rural Development: C3 Environmental Management | Land zoned C3 Environmental Management (named "E3" in the 2014 chapter). | house |
| Glen Innes Severn DCP 2014, Chapter 8 Central Business District and East Avenue: East Avenue frontage | The 32 E1 Local Centre lots inside the Chapter 8 CBD area (Illustration 8.1) with a boundary on East Avenue, between Ferguson Street and Wentworth Street. | granny flat, duplex |
| Glen Innes Severn DCP 2014, Chapter 8 Central Business District and East Avenue: CBD area | The Glen Innes CBD in Illustration 8.1 (Ferguson Street to Lang Street, East Avenue to Church Street, with the south west corner below Wentworth Street cut back to the line west of the Grey Street shops), less the East Avenue frontage lots. | granny flat, duplex |
| Glen Innes Severn DCP 2014, Chapter 6 Development in Commercial and Industrial Areas: E1 Local Centre outside the CBD area | Land zoned E1 Local Centre outside the Chapter 8 CBD area (about 7 ha north of Ferguson Street and south west of Wentworth Street). | granny flat, duplex |
Show 1 more plan
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Glen Innes Severn DCP 2014, Chapter 6 Development in Commercial and Industrial Areas: MU1 Mixed Use | Land zoned MU1 Mixed Use (three small areas: south of Lang Street and west of the Glen Innes CBD). | house, duplex |
Do Glen Innes Severn Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Glen Innes Severn?
Glen Innes Severn DCP 2014, Chapter 3 Residential Development: R1 and RU5 sets a separate setback for a house from the second street, the side street of a corner block: 3m (Chapter 3, s 3.5 Setbacks, Table 3.2 Minimum Setbacks, R1/RU5 Dwelling / Dual Occupancy row, Street). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Glen Innes Severn Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Glen Innes Severn setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Glen Innes Severn Council's setbacks checked?
We last read Glen Innes Severn Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.