What are Upper Lachlan Shire Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Upper Lachlan Shire the setbacks for a house, a granny flat or a duplex come from Upper Lachlan Shire Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Upper Lachlan Shire Council's setbacks for a house?
Upper Lachlan Shire Council's main plan, Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5), asks a single storey house for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 799.99m², no figure on lots up to 800m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m on lots up to 799.99m², no figure on lots up to 800m², 0.9m on larger lots; and rear 3m on lots up to 799.99m², no figure on lots up to 800m², 5m on larger lots.
House setbacks in Upper Lachlan Shire gives the two storey figures, the clauses and every other plan that covers one.
What are Upper Lachlan Shire Council's setbacks for a granny flat?
Upper Lachlan Shire Council's main plan, Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5), asks a single storey granny flat for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 799.99m², no figure on lots up to 800m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m on lots up to 799.99m², no figure on lots up to 800m², 0.9m on larger lots; and rear 3m on lots up to 799.99m², no figure on lots up to 800m², 5m on larger lots.
Granny flat setbacks in Upper Lachlan Shire gives the two storey figures, the clauses and every other plan that covers one.
What are Upper Lachlan Shire Council's setbacks for a duplex?
Upper Lachlan Shire Council's main plan, Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 799.99m², no figure on lots up to 800m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m on lots up to 799.99m², no figure on lots up to 800m², 0.9m on larger lots; and rear 3m on lots up to 799.99m², no figure on lots up to 800m², 5m on larger lots.
Duplex setbacks in Upper Lachlan Shire gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Upper Lachlan Shire?
It depends on the lot: we hold 8 plans with setbacks for homes in Upper Lachlan Shire Council, and Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5) | Main plan. Land zoned R2 Low Density Residential (Crookwell) and RU5 Village (Gunning, Taralga, Collector, Dalton, Bigga, Binda and the other villages). | house, granny flat, duplex |
| Upper Lachlan DCP 2026, Part H.1.6 Heritage Character Areas with Part C.5 (RU4) | Lots zoned RU4 inside the Heritage Character Areas of Part H Figures 1 to 11 (1 lot, 15/13/DP758469). | house, granny flat, duplex |
| Upper Lachlan DCP 2026, Part H.1.6 Heritage Character Areas with Part C.5 (RU1 and RU2) | Lots zoned RU1 or RU2 inside the Heritage Character Areas of Part H Figures 1 to 11 (13 lots on village edges). | house, granny flat |
| Upper Lachlan DCP 2026, Part H.1.6 Heritage Character Areas with Parts C.1 and C.2 (R2 and RU5) | Lots zoned R2 or RU5 inside the eleven Heritage Character Areas of Part H Figures 1 to 11 (656 lots). | house, granny flat, duplex |
| Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings (C2 and C3) | Land zoned C2 Environmental Conservation or C3 Environmental Management. | house |
| Upper Lachlan DCP 2026, Part C.4 Large Lot Housing (R5) | Land zoned R5 Large Lot Residential ("Part C.4 applies to land zoned R5 Large Lot Residential"). | house, granny flat, duplex |
| Upper Lachlan DCP 2026, Part C.5 Rural Housing (RU1 and RU2) | Land zoned RU1 Primary Production or RU2 Rural Landscape. | house, granny flat |
| Upper Lachlan DCP 2026, Part C.5 Rural Housing (RU4) | Land zoned RU4 Primary Production Small Lots. | house, granny flat, duplex |
Do Upper Lachlan Shire Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Upper Lachlan Shire?
Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5) sets a separate setback for a house from the second street, the side street of a corner block: 3m for one storey, 5m for second storey building elements on lots up to 799.99m²; no figure on lots up to 800m²; 4.5m for one storey, 6.5m for second storey building elements on larger lots (Part C, C.1.4 Building Setbacks: Corner Lots, standard a. and Table 2 Dwelling Setbacks: Corner Lots). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Upper Lachlan Shire Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Upper Lachlan Shire setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Upper Lachlan Shire Council's setbacks checked?
We last read Upper Lachlan Shire Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.