What are Parkes Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Parkes the setbacks for a house, a granny flat or a duplex come from Parkes Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Parkes Council's setbacks for a house?
Parkes Council's main plan, Parkes Shire DCP 2021, Parts C.2 and C.3 (urban dwellings and medium density), asks a single storey house for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 599.99m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m; and rear 3m on lots up to 599.99m², 5m on larger lots.
House setbacks in Parkes gives the two storey figures, the clauses and every other plan that covers one.
What are Parkes Council's setbacks for a granny flat?
Parkes Council's main plan, Parkes Shire DCP 2021, Parts C.2 and C.3 (urban dwellings and medium density), asks a single storey granny flat for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 599.99m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m; and rear 3m on lots up to 599.99m², 5m on larger lots.
Granny flat setbacks in Parkes gives the two storey figures, the clauses and every other plan that covers one.
What are Parkes Council's setbacks for a duplex?
Parkes Council's main plan, Parkes Shire DCP 2021, Parts C.2 and C.3 (urban dwellings and medium density), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 599.99m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m; and rear 3m on lots up to 599.99m², 5m on larger lots.
Duplex setbacks in Parkes gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Parkes?
It depends on the lot: we hold 5 plans with setbacks for homes in Parkes Council, and Parkes Shire DCP 2021, Parts C.2 and C.3 (urban dwellings and medium density) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Parkes Shire DCP 2021, Parts C.2 and C.3 (urban dwellings and medium density) | Main plan. Land zoned R1 General Residential, RU5 Village and MU1 Mixed Use under Parkes LEP 2012. | house, granny flat, duplex |
| Parkes Shire DCP 2021, Part C.6 (rural dwellings, RU1) | Land zoned RU1 Primary Production under Parkes LEP 2012 (Part C.6.1). | house, granny flat, duplex |
| Parkes Shire DCP 2021, Part C.5.4 (R5 Zone 4,000m2 Lot Size Area) | Land zoned R5 Large Lot Residential that the Parkes LEP 2012 Lot Size Map puts in the 4,000 m2 minimum lot size (46.6 ha of R5). | house, duplex |
| Parkes Shire DCP 2021, Part C.5.4 (R5 Zone 1ha Lot Size Areas) | Land zoned R5 Large Lot Residential that the Parkes LEP 2012 Lot Size Map puts in the 1 ha minimum lot size (658.2 ha of R5). | house, duplex |
| Parkes Shire DCP 2021, Part C.5.4 (R5 Zone 4ha Lot Size Areas) | Land zoned R5 Large Lot Residential that the Parkes LEP 2012 Lot Size Map puts in the 4 ha minimum lot size (2,087.0 ha of R5). | house, duplex |
Do Parkes Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Parkes?
Parkes Shire DCP 2021, Parts C.2 and C.3 (urban dwellings and medium density) sets a separate setback for a house from the second street, the side street of a corner block: 3m (Parkes DCP 2021, Part C.2.4 Setbacks Corner Lots, standard a. table). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Parkes Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Parkes setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Parkes Council's setbacks checked?
We last read Parkes Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.