What are Kempsey Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Kempsey the setbacks for a house, a granny flat or a duplex come from Kempsey Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Kempsey Council's setbacks for a house?
Kempsey Council's main plan, Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3), asks a single storey house for these setbacks: front 5m, side 0.9m and rear 3m.
House setbacks in Kempsey gives the two storey figures, the clauses and every other plan that covers one.
What are Kempsey Council's setbacks for a granny flat?
Kempsey Council's main plan, Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3), asks a single storey granny flat for these setbacks: front at least 5m, or the street's established building line where that is further back; side 0.9m; and rear 3m.
Granny flat setbacks in Kempsey gives the two storey figures, the clauses and every other plan that covers one.
What are Kempsey Council's setbacks for a duplex?
Kempsey Council's main plan, Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3), asks a single storey duplex for these setbacks: front 5m, side 0.9m and rear 3m.
Duplex setbacks in Kempsey gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Kempsey?
It depends on the lot: we hold 6 plans with setbacks for homes in Kempsey Council, and Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3) | Main plan. Land in Zone R1 General Residential and Zone R3 Medium Density Residential. | house, granny flat, duplex |
| Kempsey DCP 2026, Part D2.1 (Zone RU5 Village) | Land in Zone RU5 Village. | house |
| Kempsey DCP 2026, Parts D2.2, D2.3 and D2.4 (Zone R5 Large Lot Residential) | Land in Zone R5 Large Lot Residential. | house, granny flat, duplex |
| Kempsey DCP 2026, Parts D3.1, D2.3 and D2.4 (Zones RU1, RU2 and RU4) | Land in Zones RU1 Primary Production, RU2 Rural Landscape and RU4 Primary Production Small Lots. | house, granny flat, duplex |
| Kempsey DCP 2026, Parts D3.1 and D2.3 (Zones C3 and C4) | Land in Zone C3 Environmental Management and Zone C4 Environmental Living. | house, duplex |
| Kempsey DCP 2026, Part D3.1 (Zone RU3 Forestry) | Land in Zone RU3 Forestry, where the LEP permits dwelling houses only. | house |
Do Kempsey Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Kempsey?
Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3) sets a separate setback for a house from the second street, the side street of a corner block: at least 3m, or the street's established building line where that is further back (Kempsey DCP 2026, Part D2.1 Dwelling Houses, Table D2.1, 1. Site Design, Setbacks, control c). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Kempsey Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Kempsey setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Kempsey Council's setbacks checked?
We last read Kempsey Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.