What are Federation Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Federation the setbacks for a house, a granny flat or a duplex come from Federation Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Federation Council's setbacks for a house?
Federation Council's main plan, Corowa DCP 2013, Chapter 2 Residential Development (Average and Higher density), asks a single storey house for these setbacks: front the average of the neighbouring homes (3m on lots up to 300m²; 4.5m on lots up to 900m²; 6.5m on lots up to 1,500m²; 10m on larger lots where there are none); side 0.9m, plus 0.25m for every metre of wall above 5.5m on lots up to 10m wide; 0.9m, plus 0.25m for every metre of wall above 4.5m on lots up to 18m wide; 1.5m, plus 0.25m for every metre of wall above 4.5m on lots up to 24m wide; 2.5m on wider lots; and rear 3m on lots up to 300m²; 3m on lots up to 900m²; 5m on lots up to 1,500m²; 10m on larger lots.
House setbacks in Federation gives the two storey figures, the clauses and every other plan that covers one.
What are Federation Council's setbacks for a granny flat?
Federation Council's main plan, Corowa DCP 2013, Chapter 2 Residential Development (Average and Higher density), asks a single storey granny flat for these setbacks: front the average of the neighbouring homes (3m on lots up to 300m²; 4.5m on lots up to 900m²; 6.5m on lots up to 1,500m²; 10m on larger lots where there are none); side 0.9m, plus 0.25m for every metre of wall above 5.5m on lots up to 10m wide; 0.9m, plus 0.25m for every metre of wall above 4.5m on lots up to 18m wide; 1.5m, plus 0.25m for every metre of wall above 4.5m on lots up to 24m wide; 2.5m on wider lots; and rear 3m on lots up to 300m²; 3m on lots up to 900m²; 5m on lots up to 1,500m²; 10m on larger lots.
Granny flat setbacks in Federation gives the two storey figures, the clauses and every other plan that covers one.
What are Federation Council's setbacks for a duplex?
Federation Council's main plan, Corowa DCP 2013, Chapter 2 Residential Development (Average and Higher density), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (4.5m where there are none), side 2m and rear 2m.
Duplex setbacks in Federation gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Federation?
It depends on the lot: we hold 8 plans with setbacks for homes in Federation Council, and Corowa DCP 2013, Chapter 2 Residential Development (Average and Higher density) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Corowa DCP 2013, Chapter 2 Residential Development (Average and Higher density) | Main plan. R1 General Residential and RU5 Village land in the former Corowa Shire (Corowa, Howlong, Mulwala and the villages), under Corowa LEP 2012. | house, granny flat, duplex |
| Corowa DCP 2013, Chapter 2 Residential Development (Lower density, 1 ha areas) | R2 Low Density Residential land in the former Corowa Shire where the Corowa LEP 2012 Lot Size Map sets a 1 ha minimum (about 811 ha around Corowa, Howlong and Mulwala). | house, granny flat, duplex |
| Corowa DCP 2013, Chapter 2 Residential Development (R2 land with a 550 m2 minimum lot) | R2 Low Density Residential land in the former Corowa Shire where the Corowa LEP 2012 Lot Size Map sets 550 m2 (about 368 ha, mostly in Corowa town, with a little in Mulwala). | house, granny flat, duplex |
| Corowa DCP 2013, Chapter 2 Residential Development (Rural, R5 Large Lot Residential) | R5 Large Lot Residential land in the former Corowa Shire (one 666 ha zone polygon, 5 ha minimum lot size). | house, granny flat |
| Corowa DCP 2013, Chapter 2 Residential Development (Rural, RU1 Primary Production) | RU1 Primary Production land in the former Corowa Shire. | house, duplex |
| Corowa DCP 2013, Chapter 7 Mulwala Foreshore Land | R1 and R2 lots in Mulwala adjoining Lake Mulwala foreshore land (DCP Ch 7: "This chapter of the CDCP applies to `foreshore land' and adjoining land around Lake Mulwala within the township of Mulwala."). | house, granny flat, duplex |
| Urana Shire DCP 2011, Circular V1 Village Zones | RU5 Village land in the former Urana Shire (Urana, Oaklands, Rand, Boree Creek and Morundah), under Urana LEP 2011. | house, granny flat, duplex |
| Urana Shire DCP 2011, Circular R2 Large Lot Residential Zone | R5 Large Lot Residential land in the former Urana Shire (about 166 ha, 1 ha minimum lot size), under Urana LEP 2011. | house, granny flat |
Do Federation Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Federation?
Corowa DCP 2013, Chapter 2 Residential Development (Average and Higher density) sets a separate setback for a house from the second street, the side street of a corner block: 2m on lots up to 600m²; 3m on lots up to 1,500m²; 5m on larger lots (Corowa DCP 2013, s 2.5 Building setbacks, standard 3 (Average density); Codes SEPP 2008 cl 3.10(11)). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Federation Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Federation setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Federation Council's setbacks checked?
We last read Federation Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.