What are Junee Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Junee the setbacks for a house, a granny flat or a duplex come from Junee Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Junee Council's setbacks for a house?
Junee Council's main plan, Junee Shire DCP 2021, Part C3 (single dwellings in villages) and Part C6 (medium density), RU5 Village, asks a single storey house for these setbacks: front at least 4.5m, or the street's established building line where that is further back on lots up to 1,500m²; the average of the neighbouring homes (10m where there are none) on larger lots; side 0.9m; and rear left to the Building Code (0.9m).
House setbacks in Junee gives the two storey figures, the clauses and every other plan that covers one.
What are Junee Council's setbacks for a granny flat?
Junee Council's main plan, Junee Shire DCP 2021, Part C3 (single dwellings in villages) and Part C6 (medium density), RU5 Village, asks a single storey granny flat for these setbacks: front at least 4.5m, or the street's established building line where that is further back; side 0.9m; and rear 0.9m.
Granny flat setbacks in Junee gives the two storey figures, the clauses and every other plan that covers one.
What are Junee Council's setbacks for a duplex?
Junee Council's main plan, Junee Shire DCP 2021, Part C3 (single dwellings in villages) and Part C6 (medium density), RU5 Village, asks a single storey duplex for these setbacks: front at least 4.5m, or the street's established building line where that is further back; side 0.9m; and rear 0.9m.
Duplex setbacks in Junee gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Junee?
It depends on the lot: we hold 7 plans with setbacks for homes in Junee Council, and Junee Shire DCP 2021, Part C3 (single dwellings in villages) and Part C6 (medium density), RU5 Village is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Junee Shire DCP 2021, Part C3 (single dwellings in villages) and Part C6 (medium density), RU5 Village | Main plan. Land zoned RU5 Village: Junee town and the villages of Old Junee, Illabo and Bethungra, outside the Junee Heritage Conservation Area. | house, granny flat, duplex |
| Junee Shire DCP 2021, Parts C3, C6 and H5 (heritage conservation area), RU5 Village in the Junee Heritage Conservation Area | RU5 Village land inside the Junee Heritage Conservation Area (Junee LEP 2012 Heritage Map, "C1"). | house, granny flat, duplex |
| Junee Shire DCP 2021, Part C3 (Crawley Estate) and Part C6 | R5 Large Lot Residential lots in the Crawley Estate (Figure 3): De Salis Drive, Gwynne Place, Loughan Road and the east end of Smythe Road, between the Olympic Highway and the RU5 subdivision at Hilton Place, west of Junee town. | house, granny flat, duplex |
| Junee Shire DCP 2021, Part C3 (Tathra Estate) and Part C6 | R5 Large Lot Residential lots in the Tathra Drive Estate (Figure 3): Tathra Drive off Gundagai Road, east of Junee town. | house, granny flat, duplex |
| Junee Shire DCP 2021, Part C3 (Wantabadgery) and Part C6 | R5 Large Lot Residential land at Wantabadgery (the only R5 zone polygon in the locality, 210 ha). | house, granny flat, duplex |
| Junee Shire DCP 2021, Part C4 (large lot and rural dwellings) and Part C6, R5 Large Lot Residential | R5 Large Lot Residential land outside the Crawley and Tathra Drive Estates and Wantabadgery: the rest of the R5 land around Junee (west along Walster Street and south of the Olympic Highway, north of the Tathra estate to Kinvara Drive), Old Junee and Illabo. | house, granny flat, duplex |
| Junee Shire DCP 2021, Part C4 (large lot and rural dwellings) and Part C6, RU1 Primary Production | Land zoned RU1 Primary Production (most of the shire). | house, granny flat, duplex |
Do Junee Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Junee?
Junee Shire DCP 2021, Part C3 (single dwellings in villages) and Part C6 (medium density), RU5 Village sets a separate setback for a house from the second street, the side street of a corner block: 3m on lots up to 1,500m²; 5m on larger lots (Part C3.1, Performance Criteria 1, table, RU5 Village Zone, Secondary Street/Corner Lots). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Junee Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Junee setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Junee Council's setbacks checked?
We last read Junee Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.