What are Bathurst Regional Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Bathurst Regional the setbacks for a house, a granny flat or a duplex come from Bathurst Regional Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Bathurst Regional Council's setbacks for a house?
Bathurst Regional Council's main plan, Bathurst Regional DCP 2014, Chapter 4 Residential Development (Zone R1), asks a single storey house for these setbacks: front at least 6m, or the street's established building line where that is further back; side left to the Building Code (0.9m); and rear left to the Building Code (0.9m).
House setbacks in Bathurst Regional gives the two storey figures, the clauses and every other plan that covers one.
What are Bathurst Regional Council's setbacks for a granny flat?
Bathurst Regional Council's main plan, Bathurst Regional DCP 2014, Chapter 4 Residential Development (Zone R1), asks a single storey granny flat for these setbacks: front at least 6m, or the street's established building line where that is further back; side left to the Building Code (0.9m); and rear left to the Building Code (0.9m).
Granny flat setbacks in Bathurst Regional gives the two storey figures, the clauses and every other plan that covers one.
What are Bathurst Regional Council's setbacks for a duplex?
Bathurst Regional Council's main plan, Bathurst Regional DCP 2014, Chapter 4 Residential Development (Zone R1), asks a single storey duplex for these setbacks: front at least 6m, or the street's established building line where that is further back; side left to the Building Code (0.9m); and rear left to the Building Code (0.9m).
Duplex setbacks in Bathurst Regional gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Bathurst Regional?
It depends on the lot: we hold 13 plans with setbacks for homes in Bathurst Regional Council, and Bathurst Regional DCP 2014, Chapter 4 Residential Development (Zone R1) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Bathurst Regional DCP 2014, Chapter 4 Residential Development (Zone R1) | Main plan. Land in Zone R1 General Residential outside the Bathurst Heritage Conservation Area (LEP C1) and outside the Laffing Waters Master Plan Precinct (Chapter 17), including R1 land in the Kelso and Perthville heritage conservation areas. | house, granny flat, duplex |
| Bathurst Regional DCP 2014, Chapter 4 Residential Development (Zones R2 and R3) | Land in Zones R2 Low Density Residential and R3 Medium Density Residential outside the Bathurst Heritage Conservation Area (LEP C1) and outside the Laffing Waters Master Plan Precinct. | house, granny flat |
| Bathurst Regional DCP 2014, Chapters 4 and 5 (Zones E1 and E2) | Land in Zones E1 Local Centre and E2 Commercial Centre outside the Bathurst Heritage Conservation Area (LEP C1) (for example the Kelso and Laffing Waters local centres). | house, granny flat, duplex |
| Bathurst Regional DCP 2014, Bathurst Heritage Conservation Area (Zones R1, E1 and E2) | Land in Zones R1, E1 and E2 inside the Bathurst Heritage Conservation Area (LEP Schedule 5, C1), including the Mid Century Heritage Precincts (DCP Map 33). | house, granny flat, duplex |
| Bathurst Regional DCP 2014, Bathurst Heritage Conservation Area (Zones R2 and R3) | Land in Zones R2 and R3 inside the Bathurst Heritage Conservation Area (LEP Schedule 5, C1). | house, granny flat |
| Bathurst Regional DCP 2014, Chapter 7 Village Development (Zone RU5) | Land in Zone RU5 Village, inside and outside the LEP heritage conservation areas (the Hill End, Sofala, Rockley, Wattle Flat, Peel and Trunkey Creek conservation areas, and Georges Plains, Yetholme, Raglan and the other villages). | house, granny flat, duplex |
| Bathurst Regional DCP 2014, Chapter 6 Rural Development (Zones RU1, RU2 and RU4) | Land in Zones RU1 Primary Production, RU2 Rural Landscape and RU4 Primary Production Small Lots. | house, granny flat |
| Bathurst Regional DCP 2014, Chapter 6 (Zones R5 and C4) | Land in Zones R5 Large Lot Residential and C4 Environmental Living, other than the Mount Haven Estate. | house, granny flat |
Show 5 more plans
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Bathurst Regional DCP 2014, s 6.10 Mount Haven Estate | The Mount Haven Estate, Meadow Flat (DP 270159, DCP Map No. 20), zoned C4 and RU1. | house, granny flat |
| Bathurst Regional DCP 2014, s 6.15 Perthville "Area A" | Perthville "Area A" on DCP Map No. 2 (Lot 4 Sec 3 DP 758840, north of Apsley Street), zoned RU4. | house, granny flat |
| Bathurst Regional DCP 2014, Chapter 17 Laffing Waters, Medium Density Housing | The Medium Density Housing Land Use Area of the Laffing Waters Master Plan Precinct, Kelso (DCP Map No. 4A), zoned R3. | house, granny flat |
| Bathurst Regional DCP 2014, Chapter 17 Laffing Waters, Conventional Density Housing | The Conventional Density Housing Land Use Area of the Laffing Waters Master Plan Precinct, Kelso (DCP Map No. 4A), zoned R1. | house, granny flat, duplex |
| Bathurst Regional DCP 2014, Chapter 17 Laffing Waters, Low Density Housing | The Low Density Housing Land Use Area of the Laffing Waters Master Plan Precinct, Kelso (DCP Map No. 4A), zoned R1. | house, granny flat, duplex |
Do Bathurst Regional Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Bathurst Regional?
Bathurst Regional DCP 2014, Chapter 4 Residential Development (Zone R1) sets a separate setback for a house from the second street, the side street of a corner block: 2m (Bathurst Regional DCP 2014, Ch 4, s 4.4.2 Front Building Line Setback (corner allotments)). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Bathurst Regional Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Bathurst Regional setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Bathurst Regional Council's setbacks checked?
We last read Bathurst Regional Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.