What are Broken Hill Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Broken Hill the setbacks for a house, a granny flat or a duplex come from Broken Hill Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Broken Hill Council's setbacks for a house?
Broken Hill Council's main plan, Broken Hill DCP 2016, s 3.2 Development In Residential Zones (Zone R1), names a house but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.
House setbacks in Broken Hill gives the complying development figures and every other plan that covers one.
What are Broken Hill Council's setbacks for a granny flat?
Broken Hill Council's main plan, Broken Hill DCP 2016, s 3.2 Development In Residential Zones (Zone R1), names a granny flat but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.
Granny flat setbacks in Broken Hill gives the complying development figures and every other plan that covers one.
What are Broken Hill Council's setbacks for a duplex?
Broken Hill Council's main plan, Broken Hill DCP 2016, s 3.2 Development In Residential Zones (Zone R1), names a duplex but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.
Duplex setbacks in Broken Hill gives the complying development figures and every other plan that covers one.
Which DCP covers my block in Broken Hill?
It depends on the lot: we hold 4 plans with setbacks for homes in Broken Hill Council, and Broken Hill DCP 2016, s 3.2 Development In Residential Zones (Zone R1) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Broken Hill DCP 2016, s 3.2 Development In Residential Zones (Zone R1) | Main plan. Land in Zone R1 General Residential, the only residential zone in Broken Hill (no R2, R3, R4 or R5). | house, granny flat, duplex |
| Broken Hill DCP 2016, s 3.5 Rural development (Zone RU2) | Land in Zone RU2 Rural Landscape. | house, duplex |
| Broken Hill DCP 2016 (Zone C4 Environmental Living: no housing section) | Land in Zone C4 Environmental Living. | house, granny flat, duplex |
| Broken Hill DCP 2016, s 3.3 Development in business zones (Zones E1 and MU1) | Land in Zone E1 Local Centre or MU1 Mixed Use (the former B1, B2 and B4 zones s 3.3 names), where the LEP permits houses, granny flats and duplexes but s 3.3 covers only commercial development. | house, granny flat, duplex |
Do Broken Hill Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Broken Hill?
Broken Hill DCP 2016, s 3.2 Development In Residential Zones (Zone R1) sets no separate setback for the second street of a corner block for a house, so ask the council how it treats one. Under complying development the code sets one by lot size.
What else do people ask?
Can Broken Hill Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Broken Hill setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Broken Hill Council's setbacks checked?
We last read Broken Hill Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.