What are Brewarrina Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Brewarrina the setbacks for a house, a granny flat or a duplex come from Brewarrina Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Brewarrina Council's setbacks for a house?
Brewarrina Council's main plan, Brewarrina Shire DCP 2023, s 4.3 and 4.4 (RU5 Village), asks a single storey house for these setbacks: front 6m, side left to the Building Code (0.9m) and rear left to the Building Code (0.9m).
House setbacks in Brewarrina gives the two storey figures, the clauses and every other plan that covers one.
What are Brewarrina Council's setbacks for a granny flat?
Brewarrina Council's main plan, Brewarrina Shire DCP 2023, s 4.3 and 4.4 (RU5 Village), asks a single storey granny flat for these setbacks: front 6m, side left to the Building Code (0.9m) and rear left to the Building Code (0.9m).
Granny flat setbacks in Brewarrina gives the two storey figures, the clauses and every other plan that covers one.
What are Brewarrina Council's setbacks for a duplex?
Brewarrina Council's main plan, Brewarrina Shire DCP 2023, s 4.3 and 4.4 (RU5 Village), asks a single storey duplex for these setbacks: front 6m, side 1m and rear 1m.
Duplex setbacks in Brewarrina gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Brewarrina?
It depends on the lot: we hold 3 plans with setbacks for homes in Brewarrina Council, and Brewarrina Shire DCP 2023, s 4.3 and 4.4 (RU5 Village) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Brewarrina Shire DCP 2023, s 4.3 and 4.4 (RU5 Village) | Main plan. Land zoned RU5 Village: Brewarrina town and the villages of Goodooga, Angledool, Weilmoringle and Gongolgon. | house, granny flat, duplex |
| Brewarrina Shire DCP 2023, s 4.3 and 4.4 (R5 Large Lot Residential) | All R5 Large Lot Residential land (285.0 ha around Brewarrina town), whatever its Lot Size Map minimum (2 ha or 4 ha). | house, granny flat, duplex |
| Brewarrina Shire DCP 2023, s 4.3 and 4.4 (RU1 Primary Production) | Land zoned RU1 Primary Production (the rural shire outside the villages). | house, duplex |
Do Brewarrina Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Brewarrina?
Brewarrina Shire DCP 2023, s 4.3 and 4.4 (RU5 Village) sets a separate setback for a house from the second street, the side street of a corner block: 6m (Brewarrina DCP 2023, s 4.3.1 Building Setbacks, table; s 4.3.2 Design; Annexure 7 Subdivision, s 1.1 Lot size). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Brewarrina Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Brewarrina setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Brewarrina Council's setbacks checked?
We last read Brewarrina Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.