What are Wagga Wagga Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Wagga Wagga the setbacks for a house, a granny flat or a duplex come from Wagga Wagga Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Wagga Wagga Council's setbacks for a house?
Wagga Wagga Council's main plan, Wagga Wagga DCP 2010, Section 9 Residential Development (R1, R3 and MU1), asks a single storey house for these setbacks: front at least 6m, or the street's established building line where that is further back on lots up to 1,999.99m²; no figure on larger lots. It does not set a side or rear setback: ask the council.
House setbacks in Wagga Wagga gives the two storey figures, the clauses and every other plan that covers one.
What are Wagga Wagga Council's setbacks for a granny flat?
Wagga Wagga Council's main plan, Wagga Wagga DCP 2010, Section 9 Residential Development (R1, R3 and MU1), asks a single storey granny flat for these setbacks: front at least 6m, or the street's established building line where that is further back on lots up to 1,999.99m²; no figure on larger lots; and rear the average of the neighbouring homes (detached secondary dwellings). It does not set a side setback: ask the council.
Granny flat setbacks in Wagga Wagga gives the two storey figures, the clauses and every other plan that covers one.
What are Wagga Wagga Council's setbacks for a duplex?
Wagga Wagga Council's main plan, Wagga Wagga DCP 2010, Section 9 Residential Development (R1, R3 and MU1), asks a single storey duplex for these setbacks: front at least 6m, or the street's established building line where that is further back on lots up to 1,999.99m²; no figure on larger lots. It does not set a side or rear setback: ask the council.
Duplex setbacks in Wagga Wagga gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Wagga Wagga?
It depends on the lot: we hold 10 plans with setbacks for homes in Wagga Wagga Council, and Wagga Wagga DCP 2010, Section 9 Residential Development (R1, R3 and MU1) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Wagga Wagga DCP 2010, Section 9 Residential Development (R1, R3 and MU1) | Main plan. R1 General Residential, R3 Medium Density Residential and MU1 Mixed Use land across Wagga Wagga, including the Boorooma (Section 14), Lloyd (Section 15) and Gobbagombalin (Section 16) urban release areas, which refer houses back to Section 9. | house, granny flat, duplex |
| Wagga Wagga DCP 2010, Section 9 Residential Development (R5 Large Lot Residential) | R5 Large Lot Residential land, which s 9.3.7 C2 gives a 2 m side setback. | house, granny flat, duplex |
| Wagga Wagga DCP 2010, Section 9 Residential Development (RU4 Primary Production Small Lots) | RU4 Primary Production Small Lots land, which s 9.3.7 C2 gives a 10 m side setback. | house, granny flat, duplex |
| Wagga Wagga DCP 2010, Section 9 Residential Development (C4 Environmental Living) | C4 Environmental Living land. | house, granny flat |
| Wagga Wagga DCP 2010, Section 8 Rural Development (RU1 and RU2) | RU1 Primary Production and RU2 Rural Landscape land. | house, granny flat, duplex |
| Wagga Wagga DCP 2010, Section 8 Rural Development (RU6 Transition) | RU6 Transition land. | house |
| Wagga Wagga DCP 2010, Section 6 Villages | RU5 Village land (the villages, among them Collingullie, Ladysmith, North Wagga Wagga, Oura, Tarcutta and Uranquinty). | house, granny flat, duplex |
| Wagga Wagga DCP 2010, Section 9, s 9.1.5 Staunton Estate (lots on Spring Street and Staunton Parkway) | Staunton Estate lots facing Spring Street (Lots 10 to 27 DP1220469) and Staunton Parkway (Lots 1 to 9 DP1220469), R3, Spring Street, Wagga Wagga (Figure 9.1.5). | house, granny flat, duplex |
Show 2 more plans
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Wagga Wagga DCP 2010, Section 9, s 9.1.5 Staunton Estate (other lots) | The rest of the Staunton Estate, R3, Spring Street, Wagga Wagga (Figure 9.1.5): today the residue Lot 28 DP1220469, still to be subdivided. | house, granny flat, duplex |
| Wagga Wagga DCP 2010, Section 17 Southern Growth Area Zone 1 (Rowan), R3 land | R3 Medium Density Residential land in Southern Growth Area Zone 1 (Rowan urban release area, bounded by Holbrook, Lloyd, Plumpton and Rowan Roads; Section 17 Figure 1). | house, granny flat, duplex |
Do Wagga Wagga Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Wagga Wagga?
Wagga Wagga DCP 2010, Section 9 Residential Development (R1, R3 and MU1) sets a separate setback for a house from the second street, the side street of a corner block: 3m on lots up to 1,999.99m²; no figure on larger lots (Wagga Wagga DCP 2010, Section 9, s 9.3.6 Front and secondary setbacks, C1). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Wagga Wagga Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Wagga Wagga setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Wagga Wagga Council's setbacks checked?
We last read Wagga Wagga Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.