Skip to main content

What are Balranald Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Balranald the setbacks for a house, a granny flat or a duplex come from Balranald Council's setback policy, which stands in for a development control plan (DCP), unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Balranald Council's setbacks for a house?

Balranald Council's main plan, Balranald Building Setback Policy (a council policy, not a DCP), RU5 Village, asks a single storey house for these setbacks: front 6m. It does not set a side or rear setback: ask the council.

House setbacks in Balranald gives the two storey figures, the clauses and every other plan that covers one.

What are Balranald Council's setbacks for a granny flat?

Balranald Council's main plan, Balranald Building Setback Policy (a council policy, not a DCP), RU5 Village, asks a single storey granny flat for these setbacks: front 6m. It does not set a side or rear setback: ask the council.

Granny flat setbacks in Balranald gives the two storey figures, the clauses and every other plan that covers one.

What are Balranald Council's setbacks for a duplex?

Balranald Council's main plan, Balranald Building Setback Policy (a council policy, not a DCP), RU5 Village, asks a single storey duplex for these setbacks: front 6m. It does not set a side or rear setback: ask the council.

Duplex setbacks in Balranald gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Balranald?

It depends on the lot: we hold 2 plans with setbacks for homes in Balranald Council, and Balranald Building Setback Policy (a council policy, not a DCP), RU5 Village is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Balranald with setbacks for homes
PlanWhere it appliesHomes it covers
Balranald Building Setback Policy (a council policy, not a DCP), RU5 VillageMain plan. Land zoned RU5 Village: the towns of Balranald and Euston and the village of Kyalite (LEP RU5 objective: "To define the town boundaries of Balranald, Euston and Kyalite").house, granny flat, duplex
Balranald Shire: no DCP (RU1 Primary Production and RU4 Primary Production Small Lots)Land zoned RU1 Primary Production or RU4 Primary Production Small Lots (the farming land of the shire).house

Do Balranald Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Balranald?

Balranald Building Setback Policy (a council policy, not a DCP), RU5 Village sets a separate setback for a house from the second street, the side street of a corner block: no figure on lots up to 199.99m²; 2m on lots up to 600m²; 3m on lots up to 1,500m²; 5m on larger lots (Building Setback Policy, Policy Statement 2 and Table 1). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Balranald Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Balranald setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Balranald Council's setbacks checked?

We last read Balranald Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block