Skip to main content

What are Richmond Valley Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Richmond Valley the setbacks for a house, a granny flat or a duplex come from Richmond Valley Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Richmond Valley Council's setbacks for a house?

Richmond Valley Council's main plan, Richmond Valley DCP 2021, Part A Residential Development (R1 General Residential and RU5 Village), asks a single storey house for these setbacks: front the average of the neighbouring homes (6m where there are none); side 0.9m, plus 0.25m for every metre of wall above 3.5m; and rear 3m.

House setbacks in Richmond Valley gives the two storey figures, the clauses and every other plan that covers one.

What are Richmond Valley Council's setbacks for a granny flat?

Richmond Valley Council's main plan, Richmond Valley DCP 2021, Part A Residential Development (R1 General Residential and RU5 Village), asks a single storey granny flat for these setbacks: front the average of the neighbouring homes (6m where there are none); side 0.9m, plus 0.25m for every metre of wall above 3.5m; and rear 3m.

Granny flat setbacks in Richmond Valley gives the two storey figures, the clauses and every other plan that covers one.

What are Richmond Valley Council's setbacks for a duplex?

Richmond Valley Council's main plan, Richmond Valley DCP 2021, Part A Residential Development (R1 General Residential and RU5 Village), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (6m where there are none); side 0.9m, plus 0.25m for every metre of wall above 3.5m; and rear 3m.

Duplex setbacks in Richmond Valley gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Richmond Valley?

It depends on the lot: we hold 5 plans with setbacks for homes in Richmond Valley Council, and Richmond Valley DCP 2021, Part A Residential Development (R1 General Residential and RU5 Village) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Richmond Valley with setbacks for homes
PlanWhere it appliesHomes it covers
Richmond Valley DCP 2021, Part A Residential Development (R1 General Residential and RU5 Village)Main plan. R1 General Residential and RU5 Village land in Richmond Valley (Casino, Evans Head, Coraki, Woodburn, Broadwater, Rileys Hill and the villages).house, granny flat, duplex
Richmond Valley DCP 2021, Part A Residential Development (R5 Large Lot Residential)R5 Large Lot Residential land.house, granny flat, duplex
Richmond Valley DCP 2021, Part A Residential Development (RU1 Primary Production)RU1 Primary Production land.house, duplex
Richmond Valley DCP 2021, Part A Residential Development (C3 Environmental Management)C3 Environmental Management land (named "E3 Environmental Management" in the 2021 contents page; in this LEP E3 is now Productivity Support, so the zone test is C3 only).house, duplex
Richmond Valley DCP 2021, Part B Commercial Development and Part I-3 Building Setbacks (E1 Local Centre)E1 Local Centre land (local centres in Casino and Evans Head).house, granny flat, duplex

Do Richmond Valley Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Richmond Valley?

Richmond Valley DCP 2021, Part A Residential Development (R1 General Residential and RU5 Village) sets a separate setback for a house from the second street, the side street of a corner block: 3m (Richmond Valley DCP 2021, Part A-1, A-1.3 Building Setbacks, Setbacks to Secondary and Parallel Roads, cl 4 and 5). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Richmond Valley Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Richmond Valley setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Richmond Valley Council's setbacks checked?

We last read Richmond Valley Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block