Skip to main content

What are Bland Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Bland the setbacks for a house, a granny flat or a duplex come from Bland Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Bland Council's setbacks for a house?

Bland Council's main plan, Bland Shire DCP 2012, R1 General Residential (s 3.2 and Chapter 4), asks a single storey house for these setbacks: front 5m, side not set by the DCP: ask the council and rear not set by the DCP: ask the council.

House setbacks in Bland gives the two storey figures, the clauses and every other plan that covers one.

What are Bland Council's setbacks for a granny flat?

Bland Council's main plan, Bland Shire DCP 2012, R1 General Residential (s 3.2 and Chapter 4), asks a single storey granny flat for these setbacks: front 5m, side not set by the DCP: ask the council and rear not set by the DCP: ask the council.

Granny flat setbacks in Bland gives the two storey figures, the clauses and every other plan that covers one.

What are Bland Council's setbacks for a duplex?

Bland Council's main plan, Bland Shire DCP 2012, R1 General Residential (s 3.2 and Chapter 4), asks a single storey duplex for these setbacks: front 5m, side not set by the DCP: ask the council and rear not set by the DCP: ask the council.

Duplex setbacks in Bland gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Bland?

It depends on the lot: we hold 6 plans with setbacks for homes in Bland Council, and Bland Shire DCP 2012, R1 General Residential (s 3.2 and Chapter 4) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Bland with setbacks for homes
PlanWhere it appliesHomes it covers
Bland Shire DCP 2012, R1 General Residential (s 3.2 and Chapter 4)Main plan. Bland LEP 2011 Zone R1 General Residential: six polygons, about 359 ha, all in West Wyalong and Wyalong.house, granny flat, duplex
Bland Shire DCP 2012, R5 Large Lot Residential (s 3.2 and Chapter 4)Bland LEP 2011 Zone R5 Large Lot Residential: fifteen polygons, about 939 ha, around West Wyalong and Wyalong and beside the villages of Barmedman, Mirrool, Tallimba, Ungarie and Weethalle.house, granny flat
Bland Shire DCP 2012, E1 Local Centre (DCP's B2 zone: s 3.2 and Chapter 4)Bland LEP 2011 Zone E1 Local Centre: four polygons, about 30 ha, the West Wyalong (Main Street) and Wyalong (Neeld Street) town centres.house, granny flat, duplex
Bland Shire DCP 2012, Chapter 8 Village Development (Mirrool, Tallimba and Weethalle)Bland LEP 2011 Zone RU5 Village in Mirrool, Tallimba and Weethalle (five RU5 polygons: Weethalle three (about 34 ha), Tallimba one (about 10 ha), Mirrool one (about 16 ha)).house, granny flat, duplex
Bland Shire DCP 2012, Chapter 8 Village Development (Barmedman and Ungarie)Bland LEP 2011 Zone RU5 Village in Barmedman and Ungarie (four RU5 polygons: Barmedman two (about 39 ha), Ungarie two (about 79 ha)).house, granny flat, duplex
Bland Shire DCP 2012, RU1 Primary Production (s 3.1 Rural Dwellings and Chapter 9)Bland LEP 2011 Zone RU1 Primary Production (about 8,363 km2, most of the Shire).house, duplex

Do Bland Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Bland?

Bland Shire DCP 2012, R1 General Residential (s 3.2 and Chapter 4) sets a separate setback for a house from the second street, the side street of a corner block: 3m (Bland Shire DCP 2012, s 3.2.4, R1 General Residential Zone, PD10.4 / AD10.4.1). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Bland Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Bland setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Bland Council's setbacks checked?

We last read Bland Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block