Skip to main content

What are Ryde Council's setbacks for a house, granny flat or duplex?

A setback is how far a home must sit from each boundary of its lot. In Ryde the setbacks for a house, a granny flat or a duplex come from Ryde Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.

It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.

Check your address

NSW addresses only. Free, and no sign up.

What are Ryde Council's setbacks for a house?

Ryde Council's main plan, City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached) (R2, R3, R4), asks a single storey house for these setbacks: front 6m; side 0.9m; and rear 25% of the lot depth, and at least 8m.

House setbacks in Ryde gives the two storey figures, the clauses and every other plan that covers one.

What are Ryde Council's setbacks for a granny flat?

Ryde Council's main plan, City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached) (R2, R3, R4), names a granny flat but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.

Granny flat setbacks in Ryde gives the complying development figures and every other plan that covers one.

What are Ryde Council's setbacks for a duplex?

Ryde Council's main plan, City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached) (R2, R3, R4), asks a single storey duplex for these setbacks: front 6m; side 0.9m; and rear 25% of the lot depth, and at least 8m.

Duplex setbacks in Ryde gives the two storey figures, the clauses and every other plan that covers one.

Which DCP covers my block in Ryde?

It depends on the lot: we hold 9 plans with setbacks for homes in Ryde Council, and City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached) (R2, R3, R4) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.

Every plan in Ryde with setbacks for homes
PlanWhere it appliesHomes it covers
City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached) (R2, R3, R4)Main plan. Zones R2 Low Density Residential, R3 Medium Density Residential and R4 High Density Residential in the City of Ryde, outside the character and conservation areas below.house, granny flat, duplex
City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached) (R1)Zone R1 General Residential in the City of Ryde (about 11 ha).house, granny flat
City of Ryde DCP 2014, Part 5.1 Coronation Avenue and Trelawney Street, Eastwood Character AreaThe Coronation Avenue and Trelawney Street, Eastwood Character Area shown on Figure 5.1.01, less the four corner lots that have their own plans: Coronation Avenue 3 to 23 and 2 to 6, Trelawney Street 31A, 33, 35, 37 and 39, and 6 Clanwilliam Street (25 lots), zoned R2.house, granny flat, duplex
City of Ryde DCP 2014, Part 5.1 Coronation Avenue and Trelawney Street, Eastwood Character Area (Stewart Street corner lots)The two corner lots of the Coronation Avenue and Trelawney Street Character Area (Figure 5.1.01) with a side frontage to Stewart Street: 8 and 10 Coronation Avenue, zoned R2.house, granny flat, duplex
City of Ryde DCP 2014, Part 5.1 Coronation Avenue and Trelawney Street, Eastwood Character Area (corner lots on Clanwilliam Street and Shaftsbury Road)The two corner lots of the Coronation Avenue and Trelawney Street Character Area (Figure 5.1.01) whose side street is neither Coronation Avenue nor Stewart Street: 1 Coronation Avenue (side to Clanwilliam Street) and 31 Trelawney Street (side to Shaftsbury Road), zoned R2.house, granny flat, duplex
City of Ryde DCP 2014, Part 5.2 Eastwood House Estate Heritage Conservation AreaThe Eastwood House Estate heritage conservation area (Ryde LEP 2014 Schedule 5, C4): the land "edged by a thick black line on the map marked "Eastwood House Conservation Area"" (Part 5.2 s 1.0, Figure 5.2.01).house, granny flat, duplex
City of Ryde DCP 2014, Part 5.3 Tyrell Street, Gladesville, Character AreaThe Tyrell Street, Gladesville Character Area, which is also heritage conservation area C8 under Ryde LEP 2014 Schedule 5: the land "edged by a thick black line on the map" (Part 5.3 s 1.0, Figure 5.3.01).house, granny flat, duplex
City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached), s 3.1 West Ryde Special Development AreaThe West Ryde Special Development Area shown on Figure 3.3.28: the land between Marsden Road and Brush Road from Rutledge Street south to where Marsden Road meets Winbourne Street, including Marsden High School (south of the school, only the land west of Winbourne Street).house, granny flat, duplex
Show 1 more plan
Every plan in Ryde with setbacks for homes, continued
PlanWhere it appliesHomes it covers
City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached), s 3.2 Denistone Character AreaThe Denistone Character Area shown on Figure 3.3.29: Bellevue Avenue, Burman Road, Simla Road, Buena Vista Avenue, the west side of Chatham Road, the east side of Trelawney Street around Outlook Park, and some Shaftsbury Road and Clanalpine Street lots (317 lots).house, granny flat, duplex

Do Ryde Council's setbacks apply to complying development?

No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).

The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

What setbacks apply on a corner block in Ryde?

City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached) (R2, R3, R4) sets a separate setback for a house from the second street, the side street of a corner block: 2m (City of Ryde DCP 2014, Part 3.3 Dwelling Houses and Dual Occupancy (attached), s 2.9.1 Front Setbacks, control b). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.

What else do people ask?

Can Ryde Council approve a smaller setback?

It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.

Do Ryde setbacks apply to sheds, pools and fences?

Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were Ryde Council's setbacks checked?

We last read Ryde Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block