What are Liverpool Plains Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Liverpool Plains the setbacks for a house, a granny flat or a duplex come from Liverpool Plains Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Liverpool Plains Council's setbacks for a house?
Liverpool Plains Council's main plan, Liverpool Plains DCP 2012, s 3.1 and 3.2 (R1 General Residential), asks a single storey house for these setbacks: front 4.5m, side left to the Building Code (0.9m) and rear left to the Building Code (0.9m).
House setbacks in Liverpool Plains gives the two storey figures, the clauses and every other plan that covers one.
What are Liverpool Plains Council's setbacks for a granny flat?
Liverpool Plains Council's main plan, Liverpool Plains DCP 2012, s 3.1 and 3.2 (R1 General Residential), asks a single storey granny flat for these setbacks: front 4.5m, side left to the Building Code (0.9m) and rear left to the Building Code (0.9m).
Granny flat setbacks in Liverpool Plains gives the two storey figures, the clauses and every other plan that covers one.
What are Liverpool Plains Council's setbacks for a duplex?
Liverpool Plains Council's main plan, Liverpool Plains DCP 2012, s 3.1 and 3.2 (R1 General Residential), asks a single storey duplex for these setbacks: front 4.5m, side 1m and rear 1m.
Duplex setbacks in Liverpool Plains gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Liverpool Plains?
It depends on the lot: we hold 11 plans with setbacks for homes in Liverpool Plains Council, and Liverpool Plains DCP 2012, s 3.1 and 3.2 (R1 General Residential) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Liverpool Plains DCP 2012, s 3.1 and 3.2 (R1 General Residential) | Main plan. Land zoned R1 General Residential (Quirindi and Werris Creek), outside the Quirindi North Residential Area. | house, granny flat, duplex |
| Liverpool Plains DCP 2012, s 3.1 and 3.2 (RU5 Village) | Land zoned RU5 Village (Willow Tree, Wallabadah, Currabubula, Spring Ridge, Caroona, Blackville, Premer and a small RU5 area at Braefield, south of Quirindi). | house, granny flat, duplex |
| Liverpool Plains DCP 2012, s 3.1 and 3.2 (RU1 Primary Production) | Land zoned RU1 Primary Production (almost all of the shire). | house, duplex |
| Liverpool Plains DCP 2012, s 3.1 and 3.2 (R5, Lot Size Map under 2 ha) | R5 Large Lot Residential land whose Lot Size Map minimum is under 2 ha (4,000, 5,000 or 8,000 m2, 1 ha or 1.5 ha): about 590 ha. Note 1 to s 3.1.1 picks the row by the LEP minimum, not the lot's own area. | house, granny flat, duplex |
| Liverpool Plains DCP 2012, s 3.1 and 3.2 (R5, Lot Size Map 2 ha) | R5 Large Lot Residential land whose Lot Size Map minimum is exactly 2 ha, outside the Quirindi North Residential Area: about 112 ha (250.6 ha in all, 138.7 ha of it in the QNRA). | house, granny flat, duplex |
| Liverpool Plains DCP 2012, s 3.1 and 3.2 (R5, Lot Size Map over 2 ha) | R5 Large Lot Residential land whose Lot Size Map minimum is over 2 ha (2.5, 5, 7, 10, 20, 40 or 200 ha): about 1,818 ha, mostly the 40 ha land south of Quirindi and north of the QNRA. | house, granny flat, duplex |
| Liverpool Plains DCP 2012, s 4.3 Quirindi North Residential Area (R5) | R5 land in the Quirindi North Residential Area (Werris Creek Road, Bradys Lane, Bells Gate Road), as the s 4.3 Structure Plan shows: s 3 figures (Lot Size Map 2 ha, so no house street frontage) with the s 4.3 controls added. | house, granny flat, duplex |
| Liverpool Plains DCP 2012, s 4.3 Quirindi North Residential Area (C4) | C4 Environmental Living land in the Quirindi North Residential Area (the s 4.3 "E4 zone"): s 4.3.9 sets setbacks by vegetation, with no figure. | house, duplex |
Show 3 more plans
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Liverpool Plains DCP 2012, s 4.3 Quirindi North Residential Area (R1) | R1 land inside the Quirindi North Residential Area outline (7.7 ha at its south end, beside Quirindi, part of 12//DP878120 whose point is in C4, so no current lot matches it; kept for when that land is subdivided): the R1 figures with the s 4.3 controls added. | house, granny flat, duplex |
| Liverpool Plains DCP 2012 (C3 and C4, no setback figures) | Land zoned C3 Environmental Management or C4 Environmental Living outside the Quirindi North Residential Area. | house, duplex |
| Liverpool Plains DCP 2012 (RU6 and MU1, no setback figures) | Land zoned RU6 Transition or MU1 Mixed Use, where the LEP permits a dwelling house only. | house |
Do Liverpool Plains Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Liverpool Plains?
Liverpool Plains DCP 2012, s 3.1 and 3.2 (R1 General Residential) sets a separate setback for a house from the second street, the side street of a corner block: 4.5m (Liverpool Plains DCP 2012, s 3.1.1 Building setbacks and maximum sizes of ancillary storage structures, table, row R1; s 3.4.1 Lot Size). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Liverpool Plains Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Liverpool Plains setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Liverpool Plains Council's setbacks checked?
We last read Liverpool Plains Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.