What are Coonamble Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Coonamble the setbacks for a house, a granny flat or a duplex come from Coonamble Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Coonamble Council's setbacks for a house?
Coonamble Council's main plan, Coonamble DCP No. 1, Coonamble Township and Surrounds (village residential sector), asks a single storey house for these setbacks: front 7.5m. It does not set a side or rear setback: ask the council.
House setbacks in Coonamble gives the two storey figures, the clauses and every other plan that covers one.
What are Coonamble Council's setbacks for a granny flat?
Coonamble Council's main plan, Coonamble DCP No. 1, Coonamble Township and Surrounds (village residential sector), asks a single storey granny flat for these setbacks: front 7.5m. It does not set a side or rear setback: ask the council.
Granny flat setbacks in Coonamble gives the two storey figures, the clauses and every other plan that covers one.
What are Coonamble Council's setbacks for a duplex?
Coonamble Council's main plan, Coonamble DCP No. 1, Coonamble Township and Surrounds (village residential sector), asks a single storey duplex for these setbacks: front 7.5m. It does not set a side or rear setback: ask the council.
Duplex setbacks in Coonamble gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Coonamble?
It depends on the lot: we hold 2 plans with setbacks for homes in Coonamble Council, and Coonamble DCP No. 1, Coonamble Township and Surrounds (village residential sector) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Coonamble DCP No. 1, Coonamble Township and Surrounds (village residential sector) | Main plan. Coonamble LEP 2011 Zone R1 General Residential, all of it in Coonamble town (seven polygons, about 406 ha), read as DCP No. 1's village residential sector. | house, granny flat, duplex |
| Coonamble DCP No. 2, Rural Small Holdings | Coonamble LEP 2011 Zone R5 Large Lot Residential (503 ha north west and 55 ha south west of Coonamble town), read as DCP No. 2's Zone 1(c) Rural Small Holdings. | house, granny flat, duplex |
Do Coonamble Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Coonamble?
Coonamble DCP No. 1, Coonamble Township and Surrounds (village residential sector) sets a separate setback for a house from the second street, the side street of a corner block: 7.5m (Coonamble DCP No. 1 (Coonamble Township and Surrounds), Building setbacks: residential sector, cl 19). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Coonamble Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Coonamble setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Coonamble Council's setbacks checked?
We last read Coonamble Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.