What are Mid-Western Regional Council's setbacks for a house, granny flat or duplex?
A setback is how far a home must sit from each boundary of its lot. In Mid-Western Regional the setbacks for a house, a granny flat or a duplex come from Mid-Western Regional Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page reads what we hold for each of the three.
It is a first look. Enter your address and the Site Checker opens at the setbacks for your lot, from the plan that covers it.
NSW addresses only. Free, and no sign up.
What are Mid-Western Regional Council's setbacks for a house?
Mid-Western Regional Council's main plan, Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3), asks a single storey house for these setbacks: front 4.5m on lots up to 899.99m²; 6.5m on lots up to 1,999.99m²; no figure on larger lots; side 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots; and rear 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots.
House setbacks in Mid-Western Regional gives the two storey figures, the clauses and every other plan that covers one.
What are Mid-Western Regional Council's setbacks for a granny flat?
Mid-Western Regional Council's main plan, Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3), asks a single storey granny flat for these setbacks: front 4.5m on lots up to 899.99m²; 6.5m on lots up to 1,999.99m²; no figure on larger lots; side 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots; and rear 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots.
Granny flat setbacks in Mid-Western Regional gives the two storey figures, the clauses and every other plan that covers one.
What are Mid-Western Regional Council's setbacks for a duplex?
Mid-Western Regional Council's main plan, Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3), asks a single storey duplex for these setbacks: front 4.5m on lots up to 899.99m²; 6.5m on lots up to 1,999.99m²; no figure on larger lots; side 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots; and rear 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots.
Duplex setbacks in Mid-Western Regional gives the two storey figures, the clauses and every other plan that covers one.
Which DCP covers my block in Mid-Western Regional?
It depends on the lot: we hold 6 plans with setbacks for homes in Mid-Western Regional Council, and Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3) is the main one. The others cover particular land, such as precincts, estates, rural land or former council areas. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot.
| Plan | Where it applies | Homes it covers |
|---|---|---|
| Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3) | Main plan. Land in Zone R1 General Residential and Zone R3 Medium Density Residential, outside the Caerleon DCP land. | house, granny flat, duplex |
| Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zone R2) | Land in Zone R2 Low Density Residential. | house, granny flat, duplex |
| Mid-Western Regional DCP 2013, Part 6.1 Dwellings in Rural Areas (Zone R5) | Land in Zone R5 Large Lot Residential, outside the Caerleon DCP land. | house, granny flat, duplex |
| Mid-Western Regional DCP 2013, Part 6.1 Dwellings in Rural Areas (Zones RU1 and RU4) | Land in Zone RU1 Primary Production and Zone RU4 Primary Production Small Lots. | house, granny flat, duplex |
| Mid-Western Regional DCP 2013, Part 6.1 Dwellings in Rural Areas (Zone RU5 Village) | Land in Zone RU5 Village, including Kandos and Rylstone (LEP cl 4.1A(2)(c) names "land in Rylstone or Kandos that is within Zone RU5 Village"). | house, granny flat, duplex |
| Mid-Western Regional DCP 2013, Appendix C Caerleon Development Control Plan (Zones R1, R5 and MU1) | The Caerleon site north west of Mudgee (Hill End Road, the Castlereagh Highway, the Gwabegar railway and Fairydale Lane), land in Zone R1, R5 or MU1 (the former B4 neighbourhood centre). | house, granny flat, duplex |
Do Mid-Western Regional Council's setbacks apply to complying development?
No. A home approved with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, follows the state codes' setbacks instead of the council's. On a 600m² (15m wide, 40m deep) lot, for example, the Site Checker reads the complying development setbacks for a house as front 4.5m, side 0.9m (1.5m at two storeys) and rear 3m (8m at two storeys).
The council's plan applies when you lodge a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
What setbacks apply on a corner block in Mid-Western Regional?
Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3) sets a separate setback for a house from the second street, the side street of a corner block: 2m on lots up to 899.99m²; 2m on lots up to 1,999.99m²; no figure on larger lots (MWRDCP 2013, Part 3 Discretionary Development Standards, s 3.1 Residential Development in Urban Areas (single dwellings and dual-occupancies), Buildings Setbacks, Deem to satisfy table). The front setback still applies to the main street. Under complying development the code sets its own second street figure by lot size.
What else do people ask?
Can Mid-Western Regional Council approve a smaller setback?
It can, through a development application. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more.
Do Mid-Western Regional setbacks apply to sheds, pools and fences?
Not the ones on this page. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were Mid-Western Regional Council's setbacks checked?
We last read Mid-Western Regional Council's plans on 12 November 2026. Each plan links to the council's own document, so you can check a figure against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.