How close to the boundary can a duplex be in Upper Lachlan Shire?
Upper Lachlan Shire Council's main plan, Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (4.5m where there are none) on lots up to 799.99m², no figure on lots up to 800m², the average of the neighbouring homes (6m where there are none) on larger lots; side 0.9m on lots up to 799.99m², no figure on lots up to 800m², 0.9m on larger lots; and rear 3m on lots up to 799.99m², no figure on lots up to 800m², 5m on larger lots.
In Upper Lachlan Shire the setbacks for a duplex come from Upper Lachlan Shire Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the duplex first.
NSW addresses only. Free, and no sign up.
What setbacks does Upper Lachlan Shire Council's main plan set for a duplex?
The table gives Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5)'s one and two storey figures and the clause each comes from. The plan covers this land: Land zoned R2 Low Density Residential (Crookwell) and RU5 Village (Gunning, Taralga, Collector, Dalton, Bigga, Binda and the other villages).
| Setback | One storey | Two storeys | Where in the plan |
|---|---|---|---|
| Front | the average of the neighbouring homes (4.5m where there are none) on lots up to 799.99m², no figure on lots up to 800m², the average of the neighbouring homes (6m where there are none) on larger lots | the average of the neighbouring homes (4.5m where there are none) on lots up to 799.99m², no figure on lots up to 800m², the average of the neighbouring homes (6m where there are none) on larger lots | Part C, C.2.4 Building Setbacks: Standard Lots, standard a. and Table 6 Medium Density Setbacks: Standard Lots |
| Side | 0.9m on lots up to 799.99m², no figure on lots up to 800m², 0.9m on larger lots | 2m for second storey building elements on lots up to 799.99m², no figure on lots up to 800m², 2m for second storey building elements on larger lots | Part C, C.2.4 Building Setbacks: Standard Lots, standard a. and Table 6 Medium Density Setbacks: Standard Lots |
| Rear | 3m on lots up to 799.99m², no figure on lots up to 800m², 5m on larger lots | 5m for second storey building elements on lots up to 799.99m², no figure on lots up to 800m², 6m for second storey building elements on larger lots | Part C, C.2.4 Building Setbacks: Standard Lots, standard a. and Table 6 Medium Density Setbacks: Standard Lots |
| Corner block, second street | 3m on lots up to 799.99m², no figure on lots up to 800m², 4.5m on larger lots | 5m for second storey building elements on lots up to 799.99m², no figure on lots up to 800m², 6.5m for second storey building elements on larger lots | Part C, C.2.5 Building Setbacks: Corner Lots, standard a. and Table 7 Medium Density Setbacks: Corner Lots |
Which DCP applies to my block in Upper Lachlan Shire?
It depends on where the lot is. Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5) is Upper Lachlan Shire Council's main plan, and 4 other plans cover a duplex on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Upper Lachlan DCP 2026, Part H.1.6 Heritage Character Areas with Part C.5 (RU4) | Lots zoned RU4 inside the Heritage Character Areas of Part H Figures 1 to 11 (1 lot, 15/13/DP758469). | the average of the neighbouring homes (50m where there are none) | not set by the DCP: ask the council | not set by the DCP: ask the council | 50m |
| Upper Lachlan DCP 2026, Part H.1.6 Heritage Character Areas with Parts C.1 and C.2 (R2 and RU5) | Lots zoned R2 or RU5 inside the eleven Heritage Character Areas of Part H Figures 1 to 11 (656 lots). | the average of the neighbouring homes (4.5m where there are none) on lots up to 799.99m², no figure on lots up to 800m², the average of the neighbouring homes (6m where there are none) on larger lots | 0.9m on lots up to 799.99m², no figure on lots up to 800m², 0.9m on larger lots | 3m on lots up to 799.99m², no figure on lots up to 800m², 5m on larger lots | 3m on lots up to 799.99m², no figure on lots up to 800m², 4.5m on larger lots |
| Upper Lachlan DCP 2026, Part C.4 Large Lot Housing (R5) | Land zoned R5 Large Lot Residential ("Part C.4 applies to land zoned R5 Large Lot Residential"). | the average of the neighbouring homes (10m where there are none) on lots up to 19,999.99m²; no figure on lots up to 20,000m²; the average of the neighbouring homes (20m where there are none) on larger lots | 5m on lots up to 19,999.99m²; no figure on lots up to 20,000m²; 10m on larger lots | 8m on lots up to 19,999.99m²; no figure on lots up to 20,000m²; 10m on larger lots | 10m on lots up to 19,999.99m²; no figure on lots up to 20,000m²; 10m on larger lots |
| Upper Lachlan DCP 2026, Part C.5 Rural Housing (RU4) | Land zoned RU4 Primary Production Small Lots. | 50m | not set by the DCP: ask the council | not set by the DCP: ask the council | 50m |
What are the complying development setbacks for a duplex?
If you build a duplex with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 0.9m (1.5m at two storeys) | 5m (12m at two storeys) | 3m |
What if my block is on a corner?
Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5) sets a separate setback for a duplex from the second street, the side street of a corner block: 3m for one storey, 5m for second storey building elements on lots up to 799.99m²; no figure on lots up to 800m²; 4.5m for one storey, 6.5m for second storey building elements on larger lots (Part C, C.2.5 Building Setbacks: Corner Lots, standard a. and Table 7 Medium Density Setbacks: Corner Lots). The complying development figure for the second street is in the CDC table above.
Does a two storey duplex need bigger setbacks?
Yes, under Upper Lachlan DCP 2026, Part C.1 Urban + Village Dwellings and Part C.2 Medium Density Dwellings (R2 and RU5): the side setback goes from 0.9m on lots up to 799.99m², no figure on lots up to 800m², 0.9m on larger lots to 2m for second storey building elements on lots up to 799.99m², no figure on lots up to 800m², 2m for second storey building elements on larger lots; the rear setback goes from 3m on lots up to 799.99m², no figure on lots up to 800m², 5m on larger lots to 5m for second storey building elements on lots up to 799.99m², no figure on lots up to 800m², 6m for second storey building elements on larger lots; the corner block, second street setback goes from 3m on lots up to 799.99m², no figure on lots up to 800m², 4.5m on larger lots to 5m for second storey building elements on lots up to 799.99m², no figure on lots up to 800m², 6.5m for second storey building elements on larger lots. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Upper Lachlan Shire Council approve a duplex closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Upper Lachlan Shire?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Upper Lachlan Shire Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.