How close to the boundary can a granny flat be in Murrumbidgee?
Murrumbidgee Council's main plan, Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point), names a granny flat but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.
In Murrumbidgee the setbacks for a granny flat come from Murrumbidgee Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the granny flat first.
NSW addresses only. Free, and no sign up.
What setbacks does Murrumbidgee Council's main plan set for a granny flat?
Murrumbidgee Council's main plan, Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point), names a granny flat but sets no front, side or rear setback for one, so a development application is assessed on its merits. Ask the council what it expects.
Which DCP applies to my block in Murrumbidgee?
It depends on where the lot is. Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point) is Murrumbidgee Council's main plan, and 9 other plans cover a granny flat on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| River Red Gum Estate DCP, Darlington Point | The River Red Gum Estate at Darlington Point (Young Street, Helena Parade, Edwards Street and Gugaa Street): Lots 1, 2, 8 to 12, 15, 17 to 27 and 30 to 55 DP1320116 and Lots 1 to 4 DP1330816 (the former Lots 13 and 14), zoned RU5 Village. | 4.5m | 0.9m | 4m | 3m |
| River Red Gum Estate DCP, Darlington Point (Lots 3 to 6, two storey lots) | Lots 3, 4, 5 and 6 DP1320116 in the River Red Gum Estate, Darlington Point (RU5 Village): the lots on which the DCP considers two storey homes (cl 8(A)(a)), whose two storey setbacks are the Inland Code's. Houses and granny flats only: cl 9(B) lists Lots 7, 16, 28 and 29 for dual occupancies, so a duplex is not available here (cl 9(C) considers multi dwelling housing on these lots). | 4.5m | 0.9m | 4m | 3m |
| River Red Gum Estate DCP, Darlington Point (Lots 7, 16, 28 and 29, duplex lots) | Lots 7, 16, 28 and 29 DP1320116 in the River Red Gum Estate, Darlington Point (RU5 Village): the four corner lots over 900 m2 on which the DCP considers dual occupancies (cl 9(B)). | 4.5m | 0.9m | 4m | 3m |
| Jerilderie DCP 2012, s 4.1 RU5 Village, Residential Precinct | Land zoned RU5 Village in the former Jerilderie Shire (Jerilderie town), other than the Commercial and Special Use precincts of DCP Schedule 5, which have their own traced outlines. | 5m | 0.9m | 0.9m | 5m |
| Jerilderie DCP 2012, s 4.2 RU5 Village, Commercial Precinct | The Commercial precinct of the Jerilderie RU5 Village zone (DCP Schedule 5, green): the main street blocks on Jerilderie and Powell Streets. | not set by the DCP: ask the council | not set by the DCP: ask the council | not set by the DCP: ask the council | not set |
| Jerilderie DCP 2012, RU5 Village, Special Uses Precinct | The Special Use precinct of the Jerilderie RU5 Village zone (DCP Schedule 5, yellow): hospital, school, church and community land. | not set by the DCP: ask the council | not set by the DCP: ask the council | not set by the DCP: ask the council | not set |
| Jerilderie DCP 2012, s 5 R5 Large Lot Residential | Land zoned R5 Large Lot Residential in the former Jerilderie Shire (around Jerilderie town). | 10m | 9m | 9m | not set |
| No DCP: Murrumbidgee LEP 2013, RU1 Primary Production | Land zoned RU1 Primary Production in the former Murrumbidgee Shire (the farmland around Coleambally and Darlington Point). | not set (the council has no DCP): ask the council | not set (the council has no DCP): ask the council | not set (the council has no DCP): ask the council | not set |
Show 1 more plan
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| No DCP: Murrumbidgee LEP 2013, R5 Large Lot Residential | Land zoned R5 Large Lot Residential in the former Murrumbidgee Shire. | not set (the council has no DCP): ask the council | not set (the council has no DCP): ask the council | not set (the council has no DCP): ask the council | not set |
What are the complying development setbacks for a granny flat?
If you build a granny flat with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 1.5m | 5m | 3m |
What if my block is on a corner?
Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point) sets no separate setback for the second street of a corner block for a granny flat, so ask the council how it treats one. The complying development figure for the second street is in the CDC table above.
Does a two storey granny flat need bigger setbacks?
Murrumbidgee DCP No. 1 "Village" (Coleambally and Darlington Point) sets no setbacks for a granny flat of any height, so ask the council. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Murrumbidgee Council approve a granny flat closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Murrumbidgee?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Murrumbidgee Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.