Skip to main content

How close to the boundary can a granny flat be in Mid-Western Regional?

Mid-Western Regional Council's main plan, Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3), asks a single storey granny flat for these setbacks: front 4.5m on lots up to 899.99m²; 6.5m on lots up to 1,999.99m²; no figure on larger lots; side 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots; and rear 0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots.

In Mid-Western Regional the setbacks for a granny flat come from Mid-Western Regional Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the granny flat first.

Check your address

NSW addresses only. Free, and no sign up.

What setbacks does Mid-Western Regional Council's main plan set for a granny flat?

The table gives Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3)'s one and two storey figures and the clause each comes from. The plan covers this land: Land in Zone R1 General Residential and Zone R3 Medium Density Residential, outside the Caerleon DCP land.

Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3): setbacks for a granny flat
SetbackOne storeyTwo storeysWhere in the plan
Front4.5m on lots up to 899.99m²; 6.5m on lots up to 1,999.99m²; no figure on larger lots4.5m on lots up to 899.99m²; 6.5m on lots up to 1,999.99m²; no figure on larger lotsMWRDCP 2013, Part 2 Fast Track Development Applications, s 2.1 General Housing and Ancillary Structures "Deemed to Satisfy" Provisions, Building Setbacks table
Side0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lotsMWRDCP 2013, Part 2 Fast Track Development Applications, s 2.1 General Housing and Ancillary Structures "Deemed to Satisfy" Provisions, Building Setbacks table
Rear0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lots0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; no figure on larger lotsMWRDCP 2013, Part 2 Fast Track Development Applications, s 2.1 General Housing and Ancillary Structures "Deemed to Satisfy" Provisions, Building Setbacks table
Corner block, second street2m on lots up to 899.99m²; 2m on lots up to 1,999.99m²; no figure on larger lots2m on lots up to 899.99m²; 2m on lots up to 1,999.99m²; no figure on larger lotsMWRDCP 2013, Part 2 Fast Track Development Applications, s 2.1 General Housing and Ancillary Structures "Deemed to Satisfy" Provisions, Building Setbacks table

Which DCP applies to my block in Mid-Western Regional?

It depends on where the lot is. Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3) is Mid-Western Regional Council's main plan, and 5 other plans cover a granny flat on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.

Other plans in Mid-Western Regional that cover a granny flat
PlanWhere it appliesFrontSideRearSecond street
Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zone R2)Land in Zone R2 Low Density Residential.4.5m on lots up to 899.99m²; 6.5m on lots up to 1,999.99m²; 10m on lots up to 10,000m²; no figure on larger lots0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; 2.5m on lots up to 10,000m²; no figure on larger lots0.9m on lots up to 899.99m²; 0.9m on lots up to 1,999.99m²; 2.5m on lots up to 10,000m²; no figure on larger lots2m on lots up to 899.99m²; 2m on lots up to 1,999.99m²; 5m on lots up to 10,000m²; no figure on larger lots
Mid-Western Regional DCP 2013, Part 6.1 Dwellings in Rural Areas (Zone R5)Land in Zone R5 Large Lot Residential, outside the Caerleon DCP land.30m on lots up to 50,000m²; 60m on larger lots20m20m15m
Mid-Western Regional DCP 2013, Part 6.1 Dwellings in Rural Areas (Zones RU1 and RU4)Land in Zone RU1 Primary Production and Zone RU4 Primary Production Small Lots.no figure on lots up to 50,000m²; 60m on larger lotsno figure on lots up to 50,000m²; 20m on larger lotsno figure on lots up to 50,000m²; 20m on larger lotsno figure on lots up to 50,000m²; 15m on larger lots
Mid-Western Regional DCP 2013, Part 6.1 Dwellings in Rural Areas (Zone RU5 Village)Land in Zone RU5 Village, including Kandos and Rylstone (LEP cl 4.1A(2)(c) names "land in Rylstone or Kandos that is within Zone RU5 Village").7.5mleft to the Building Code (0.9m)left to the Building Code (0.9m)3m
Mid-Western Regional DCP 2013, Appendix C Caerleon Development Control Plan (Zones R1, R5 and MU1)The Caerleon site north west of Mudgee (Hill End Road, the Castlereagh Highway, the Gwabegar railway and Fairydale Lane), land in Zone R1, R5 or MU1 (the former B4 neighbourhood centre).3m on lots up to 300m²; 4.5m on lots up to 649m²; 5.5m on lots up to 999m²; 6m on lots up to 1,999m²; 10m on larger lots0.9m on lots up to 300m²; 0.9m on lots up to 649m²; 0.9m on lots up to 999m²; 0.9m on lots up to 1,999m²; 5m on larger lots3m on lots up to 300m²; 3m on lots up to 649m²; 3m on lots up to 999m²; 3m on lots up to 1,999m²; 5m on larger lots2m on lots up to 300m²; 2m on lots up to 649m²; 3m on lots up to 999m²; 4m on lots up to 1,999m²; 5m on larger lots

What are the complying development setbacks for a granny flat?

If you build a granny flat with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.

Complying development (CDC) setbacks for a granny flat on three example lots
Example lotFrontSideRearCorner block, second street
450m² (15m wide, 30m deep)4.5m0.9m (1.5m at two storeys)3m2m
600m² (15m wide, 40m deep)4.5m0.9m (1.5m at two storeys)3m2m
1,000m² (20m wide, 50m deep)6.5m1.5m5m3m

What if my block is on a corner?

Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3) sets a separate setback for a granny flat from the second street, the side street of a corner block: 2m on lots up to 899.99m²; 2m on lots up to 1,999.99m²; no figure on larger lots (MWRDCP 2013, Part 2 Fast Track Development Applications, s 2.1 General Housing and Ancillary Structures "Deemed to Satisfy" Provisions, Building Setbacks table). The complying development figure for the second street is in the CDC table above.

Does a two storey granny flat need bigger setbacks?

No. Mid-Western Regional DCP 2013, Part 3.1 Residential Development in Urban Areas (Zones R1 and R3) sets the same figures for a one or two storey granny flat. Under complying development, the two storey figures are in the CDC table above.

What else do people ask?

Can Mid-Western Regional Council approve a granny flat closer to the boundary?

It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.

Do these setbacks apply to a shed, pool or fence in Mid-Western Regional?

No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were the setbacks on this page checked?

We last read Mid-Western Regional Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block