How close to the boundary can a house be in Kempsey?
Kempsey Council's main plan, Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3), asks a single storey house for these setbacks: front 5m, side 0.9m and rear 3m.
In Kempsey the setbacks for a house come from Kempsey Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the house first.
NSW addresses only. Free, and no sign up.
What setbacks does Kempsey Council's main plan set for a house?
The table gives Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3)'s one and two storey figures and the clause each comes from. The plan covers this land: Land in Zone R1 General Residential and Zone R3 Medium Density Residential.
| Setback | One storey | Two storeys | Where in the plan |
|---|---|---|---|
| Front | 5m | 5m | Kempsey DCP 2026, Part D2.1 Dwelling Houses, Table D2.1, 1. Site Design, Setbacks, control a and Table D2.2 |
| Side | 0.9m | 1.5m for second storey and above | Kempsey DCP 2026, Part D2.1 Dwelling Houses, Table D2.1, 1. Site Design, Setbacks, controls d and e, Table D2.2 |
| Rear | 3m | 3m | Kempsey DCP 2026, Part D2.1 Dwelling Houses, Table D2.1, 1. Site Design, Setbacks, control f and Table D2.2 |
| Corner block, second street | at least 3m, or the street's established building line where that is further back | at least 3m, or the street's established building line where that is further back | Kempsey DCP 2026, Part D2.1 Dwelling Houses, Table D2.1, 1. Site Design, Setbacks, control c |
Which DCP applies to my block in Kempsey?
It depends on where the lot is. Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3) is Kempsey Council's main plan, and 5 other plans cover a house on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Kempsey DCP 2026, Part D2.1 (Zone RU5 Village) | Land in Zone RU5 Village. | 5m | 0.9m | 3m | at least 3m, or the street's established building line where that is further back |
| Kempsey DCP 2026, Parts D2.2, D2.3 and D2.4 (Zone R5 Large Lot Residential) | Land in Zone R5 Large Lot Residential. | 10m | 5m | 10m | 5m |
| Kempsey DCP 2026, Parts D3.1, D2.3 and D2.4 (Zones RU1, RU2 and RU4) | Land in Zones RU1 Primary Production, RU2 Rural Landscape and RU4 Primary Production Small Lots. | 18m | 10m | 15m | 10m |
| Kempsey DCP 2026, Parts D3.1 and D2.3 (Zones C3 and C4) | Land in Zone C3 Environmental Management and Zone C4 Environmental Living. | 18m | 10m | 15m | 10m |
| Kempsey DCP 2026, Part D3.1 (Zone RU3 Forestry) | Land in Zone RU3 Forestry, where the LEP permits dwelling houses only. | 18m | 10m | 15m | 10m |
What are the complying development setbacks for a house?
If you build a house with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 1.5m (2.1m at two storeys) | 5m (12m at two storeys) | 3m |
What if my block is on a corner?
Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3) sets a separate setback for a house from the second street, the side street of a corner block: at least 3m, or the street's established building line where that is further back (Kempsey DCP 2026, Part D2.1 Dwelling Houses, Table D2.1, 1. Site Design, Setbacks, control c). The complying development figure for the second street is in the CDC table above.
Does a two storey house need bigger setbacks?
Yes, under Kempsey DCP 2026, Parts D2.1, D2.3 and D2.4 (Zones R1 and R3): the side setback goes from 0.9m to 1.5m for second storey and above. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Kempsey Council approve a house closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Kempsey?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Kempsey Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.