How close to the boundary can a duplex be in Maitland?
Maitland Council's main plan, Maitland DCP 2026, Chapter 6 Residential Uses, s 6.2.10 Table 6.5 (R1 General Residential), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (4.5m where there are none); side inside a plane rising at 45° from 3m above the boundary, and at least 0.9m; and rear 4m.
In Maitland the setbacks for a duplex come from Maitland Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the duplex first.
NSW addresses only. Free, and no sign up.
What setbacks does Maitland Council's main plan set for a duplex?
The table gives Maitland DCP 2026, Chapter 6 Residential Uses, s 6.2.10 Table 6.5 (R1 General Residential)'s one and two storey figures and the clause each comes from. The plan covers this land: R1 General Residential land in Maitland, outside the Chapter 10 locality plans and release areas and the Morpeth conservation area that set their own setbacks.
| Setback | One storey | Two storeys | Where in the plan |
|---|---|---|---|
| Front | the average of the neighbouring homes (4.5m where there are none) | the average of the neighbouring homes (4.5m where there are none) | Maitland DCP 2026, Chapter 6, s 6.2.10 Housing setbacks, PC.1, Table 6.5, Dual occupancies, Semi-detached dwellings, Front setback |
| Side | inside a plane rising at 45° from 3m above the boundary, and at least 0.9m | inside a plane rising at 45° from 3m above the boundary, and at least 0.9m | Maitland DCP 2026, Chapter 6, s 6.2.10 Housing setbacks, PC.1, Table 6.5, Dual occupancies, Semi-detached dwellings, Side setback; s 6.2.10 PC.2 |
| Rear | 4m | 6m for upper floor | Maitland DCP 2026, Chapter 6, s 6.2.10 Housing setbacks, PC.1, Table 6.5, Dual occupancies, Semi-detached dwellings, Rear setback; Note 3 |
| Corner block, second street | 2m | 2m | Maitland DCP 2026, Chapter 6, s 6.2.10 Housing setbacks, PC.1, Table 6.5, Dual occupancies, Semi-detached dwellings, Secondary setback (corner lots) |
Which DCP applies to my block in Maitland?
It depends on where the lot is. Maitland DCP 2026, Chapter 6 Residential Uses, s 6.2.10 Table 6.5 (R1 General Residential) is Maitland Council's main plan, and 9 other plans cover a duplex on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Maitland DCP 2026, Chapter 6 Residential Uses, Table 6.5 (R5 Large Lot Residential) | R5 Large Lot Residential land in Maitland, outside Bolwarra Heights, Greta (Orient Street) and the Mount Harris release area, which have their own setbacks. | the average of the neighbouring homes (4.5m where there are none) | inside a plane rising at 45° from 3m above the boundary, and at least 0.9m | 4m | 2m |
| Maitland DCP 2026, Chapter 6 Residential Uses, Table 6.5 and s 6.4 (rural zones) | RU1 Primary Production and RU2 Rural Landscape land in Maitland. | the average of the neighbouring homes (4.5m where there are none) | inside a plane rising at 45° from 3m above the boundary, and at least 0.9m | 4m | 2m |
| Maitland DCP 2026, Chapter 10, s 10.3.2 Bolwarra Heights locality plan | The land in Figure 10-5, bounded by Tocal Road, Lang Drive and Paterson Road, Bolwarra Heights: "This Locality Plan applies to all land detailed in Figure 10-5." 98% of it is R5. | 20m | inside a plane rising at 45° from 3m above the boundary, and at least 0.9m | 4m | 2m |
| Maitland DCP 2026, Chapter 10, s 10.3.4 Greta (Orient Street) locality plan | The land in Figure 10-7 on the east side of Orient Street, Greta: "This Locality Plan applies to all land indicated within Figure 10-7." The subdivided lots (DP883618) are R5; the northern strip inside the outline is part of a larger RU2 lot. | 10m | 10m | 10m | 10m |
| Maitland DCP 2026, Chapter 10, s 10.3.7 Thornton (Radburn Estate) locality plan | Radburn Estate, Thornton, as outlined in Figure 10-11: "This Locality Plan applies to: Lots within the Radburn Estate at Thornton which have a property frontage to a public reserve, and Lots within the Radburn Estate at Thornton as shown on Figure 10-11 which have a principal frontage to a public reserve." R1. | the average of the neighbouring homes (4.5m where there are none) | inside a plane rising at 45° from 3m above the boundary, and at least 0.9m | 6m (the boundary to the public reserve, where the lot's principal frontage is to the reserve) | 2m |
| Maitland DCP 2026, Chapter 10, s 10.3.8 Thornton (Hermitage Close) locality plan | The Hermitage Close precinct, Thornton, in Figure 10-12: "This Locality Plan applies to all land detailed in Figure 10-12." R1. | 12m | 4m | 4m | 5m |
| Maitland DCP 2026, Chapter 10, s 10.4.11 Mount Harris Urban Release Area | The Mount Harris Urban Release Area off Maitland Vale Road (Figure 10-100, about 23 ha, R5): "The Mount Harris Urban Release Area is made up of one precinct, which utilises the general provisions of this section." | 12m | 4m | 4m | 5m |
| Maitland DCP 2026, Chapter 10, s 10.4.17 Anambah Urban Release Area | R1 land in the Anambah Urban Release Area (Figure 10-130, about 500 ha north of Windella), mostly not yet subdivided. | the average of the neighbouring homes (4.5m where there are none) | inside a plane rising at 45° from 3m above the boundary, and at least 0.9m | 4m | 2m |
Show 1 more plan
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Maitland DCP 2026, Chapter 4 Heritage, s 4.12 Morpeth Heritage Conservation Area | R1 land in the Morpeth Heritage Conservation Area (Figure 4-13; Maitland LEP 2011 heritage map item C6). | the average of the neighbouring homes (4.5m where there are none) | inside a plane rising at 45° from 3m above the boundary, and at least 1.5m | 4m | 2m |
What are the complying development setbacks for a duplex?
If you build a duplex with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 0.9m (1.5m at two storeys) | 5m (12m at two storeys) | 3m |
What if my block is on a corner?
Maitland DCP 2026, Chapter 6 Residential Uses, s 6.2.10 Table 6.5 (R1 General Residential) sets a separate setback for a duplex from the second street, the side street of a corner block: 2m (Maitland DCP 2026, Chapter 6, s 6.2.10 Housing setbacks, PC.1, Table 6.5, Dual occupancies, Semi-detached dwellings, Secondary setback (corner lots)). The complying development figure for the second street is in the CDC table above.
Does a two storey duplex need bigger setbacks?
Yes, under Maitland DCP 2026, Chapter 6 Residential Uses, s 6.2.10 Table 6.5 (R1 General Residential): the rear setback goes from 4m to 6m for upper floor. The side setback also grows as the wall gets taller. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Maitland Council approve a duplex closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Maitland?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Maitland Council's plans on 11 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.