How close to the boundary can a duplex be in Inner West?
Inner West Council's main plan, Marrickville DCP 2011, Part 4.1 Low Density Residential Development, has no setback controls for a duplex. Ask the council which controls it applies.
In Inner West the setbacks for a duplex come from Inner West Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the duplex first.
NSW addresses only. Free, and no sign up.
What setbacks does Inner West Council's main plan set for a duplex?
Inner West Council's main plan, Marrickville DCP 2011, Part 4.1 Low Density Residential Development, has no setback controls for a duplex. Ask the council which controls it applies.
Which DCP applies to my block in Inner West?
None of the plans we hold for Inner West Council sets setbacks for a duplex, so ask the council which controls it applies. Your section 10.7 planning certificate lists the plans that apply to the lot.
What are the complying development setbacks for a duplex?
If you build a duplex with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 0.9m (1.5m at two storeys) | 5m (12m at two storeys) | 3m |
What if my block is on a corner?
Marrickville DCP 2011, Part 4.1 Low Density Residential Development sets no separate setback for the second street of a corner block for a duplex, so ask the council how it treats one. The complying development figure for the second street is in the CDC table above.
Does a two storey duplex need bigger setbacks?
Marrickville DCP 2011, Part 4.1 Low Density Residential Development sets no setbacks for a duplex of any height, so ask the council. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Inner West Council approve a duplex closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Inner West?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Inner West Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.