How close to the boundary can a house be in Byron?
Byron Council's main plan, Byron DCP 2014, Chapter D1 Residential Accommodation in Urban, Village and Special Purpose Zones, asks a single storey house for these setbacks: front 4.5m; side inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m; and rear inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m.
In Byron the setbacks for a house come from Byron Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the house first.
NSW addresses only. Free, and no sign up.
What setbacks does Byron Council's main plan set for a house?
The table gives Byron DCP 2014, Chapter D1 Residential Accommodation in Urban, Village and Special Purpose Zones's one and two storey figures and the clause each comes from. The plan covers this land: R2, R3 and R5 land under Byron LEP 2014.
| Setback | One storey | Two storeys | Where in the plan |
|---|---|---|---|
| Front | 4.5m | 4.5m | Byron DCP 2014, Chapter D1, s D1.2.2 Prescriptive Measures 1 a) to c) |
| Side | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | Byron DCP 2014, Chapter D1, s D1.2.2 Prescriptive Measure 2 a); Byron DCP 2014, Chapter D1, s D1.2.1 Prescriptive Measure 1; s D1.2.2 Performance Criterion 5; Part A Dictionary, Building height plane |
| Rear | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | Byron DCP 2014, Chapter D1, s D1.2.2 Prescriptive Measure 2 a); Byron DCP 2014, Chapter D1, s D1.2.1 Prescriptive Measure 1; s D1.2.2 Performance Criterion 5; Part A Dictionary, Building height plane |
| Corner block, second street | inside a plane rising at 45° from 1.8m above the boundary, and at least 3m | inside a plane rising at 45° from 1.8m above the boundary, and at least 3m | Byron DCP 2014, Chapter D1, s D1.2.2 Prescriptive Measure 1 d); Byron DCP 2014, Chapter D1, s D1.2.1 Prescriptive Measure 1; s D1.2.2 Performance Criterion 5; Part A Dictionary, Building height plane |
Which DCP applies to my block in Byron?
It depends on where the lot is. Byron DCP 2014, Chapter D1 Residential Accommodation in Urban, Village and Special Purpose Zones is Byron Council's main plan, and 10 other plans cover a house on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Byron DCP 2014, Chapter D1 (RU5 Village) | RU5 Village land under Byron LEP 2014. | 4.5m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 3m |
| Byron DCP 2014, Chapter D1 (MU1 Mixed Use) | MU1 Mixed Use land under Byron LEP 2014 (the former B4 Mixed Use zone that D1.1.2 lists). | 4.5m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 3m |
| Byron DCP 2014, Chapter E8 West Byron Urban Release Area (R2) | R2 land on the West Byron Bay site, Ewingsdale Road, Byron Bay. E8.3: the chapter applies to land identified as "West Byron Bay site" on the Urban Release Area Map; the Planning Portal Urban Release Area layer carries that outline (one 110 ha polygon labelled "West Byron Bay site"). | 4.5m | 0.9m | 0.9m | 3m |
| Byron DCP 2014, Chapter E8 West Byron Urban Release Area (R3) | R3 land on the West Byron Bay site, Ewingsdale Road, Byron Bay. E8.3: the chapter applies to land identified as "West Byron Bay site" on the Urban Release Area Map; the Planning Portal Urban Release Area layer carries that outline (one 110 ha polygon labelled "West Byron Bay site"). | 3.5m | 0.9m | 0.9m | 3m |
| Byron DCP 2014, Chapter D2 Residential Accommodation and Ancillary Development in Rural Zones | RU1 Primary Production and RU2 Rural Landscape land under Byron LEP 2014. | 15m | left to the Building Code (0.9m) | left to the Building Code (0.9m) | 15m |
| Byron DCP 2014, Chapter C1 Non-Indigenous Heritage, Eureka Village Landscape Conservation Area (with Chapter D2) | RU1 and RU2 land inside the Eureka Village Landscape Conservation Area (Byron LEP 2014 Schedule 5, C006). | 15m | 5m | left to the Building Code (0.9m) | 15m |
| Byron DCP 2014, Chapter E12 Gulgan Village | RU2 land in Gulgan Village, The Saddle Road and Gulgan Road, Brunswick Heads (Lot 32 DP1018929, Lot 2 DP1159910, Lot 1 DP441896, Lot 1 DP584730). | 0m on lots up to 350m², 4.5m on larger lots | 0.9m to one side, 0.9m on lots up to 350m², 1.5m on larger lots to the other | 0.9m | not set |
| Byron DCP 2010, Chapter 1 Part C Residential Development (deferred matter land, Byron LEP 1988 zone 2(a)) | Land shown as "Deferred matter" (DM) on the Byron LEP 2014 Land Zoning Map, where Byron LEP 1988 still applies (LEP 2014 cl 1.3(1A)), and which is zoned 2(a) Residential under Byron LEP 1988 (about 23.5 ha; in 2026 one 30 ha development lot, 13//DP1251383, and three small lots). | 6.5m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 3m |
Show 2 more plans
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Byron DCP 2010, Chapter 1 Part C Residential Development (deferred matter land, Byron LEP 1988 zone 7(f2)) | Land shown as "Deferred matter" (DM) on the Byron LEP 2014 Land Zoning Map, where Byron LEP 1988 still applies (LEP 2014 cl 1.3(1A)), and which is zoned 7(f2) Urban Coastal Lands under Byron LEP 1988 (about 61 ha, about 505 lots: New Brighton, Belongil and Suffolk Park beachfront). | 6.5m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 3m |
| Byron DCP 2010, Chapter 1 Part C Residential Development (deferred matter land, Byron LEP 1988 rural and 7(c)/7(d) zones) | Land shown as "Deferred matter" (DM) on the Byron LEP 2014 Land Zoning Map, where Byron LEP 1988 still applies (LEP 2014 cl 1.3(1A)), and which is zoned 1(a), 1(b1), 1(b2), 1(c1), 1(c2), 1(d), 7(c) Water Catchment or 7(d) Scenic/Escarpment under Byron LEP 1988 (about 2,050 ha, nearly all of it 7(d) hinterland). | 15m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | inside a plane rising at 45° from 1.8m above the boundary, and at least 0.9m | 15m |
What are the complying development setbacks for a house?
If you build a house with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 1.5m (2.1m at two storeys) | 5m (12m at two storeys) | 3m |
What if my block is on a corner?
Byron DCP 2014, Chapter D1 Residential Accommodation in Urban, Village and Special Purpose Zones sets a separate setback for a house from the second street, the side street of a corner block: inside a plane rising at 45° from 1.8m above the boundary, and at least 3m (Byron DCP 2014, Chapter D1, s D1.2.2 Prescriptive Measure 1 d); Byron DCP 2014, Chapter D1, s D1.2.1 Prescriptive Measure 1; s D1.2.2 Performance Criterion 5; Part A Dictionary, Building height plane). The complying development figure for the second street is in the CDC table above.
Does a two storey house need bigger setbacks?
Yes, through the wall height: under Byron DCP 2014, Chapter D1 Residential Accommodation in Urban, Village and Special Purpose Zones the side, rear and corner block, second street setback grows as the wall gets taller. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Byron Council approve a house closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Byron?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Byron Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.