Skip to main content

How close to the boundary can a granny flat be in Walgett?

Walgett Council's main plan, Walgett Shire DCP 2016, s 4.3 and s 4.5 (R1 General Residential), asks a single storey granny flat for these setbacks: front 4.5m, side left to the Building Code (0.9m) and rear left to the Building Code (0.9m).

In Walgett the setbacks for a granny flat come from Walgett Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the granny flat first.

Check your address

NSW addresses only. Free, and no sign up.

What setbacks does Walgett Council's main plan set for a granny flat?

The table gives Walgett Shire DCP 2016, s 4.3 and s 4.5 (R1 General Residential)'s one and two storey figures and the clause each comes from. The plan covers this land: Land zoned R1 General Residential (the towns of Walgett and Lightning Ridge; 348 ha, Lot Size Map 700 m2).

Walgett Shire DCP 2016, s 4.3 and s 4.5 (R1 General Residential): setbacks for a granny flat
SetbackOne storeyTwo storeysWhere in the plan
Front4.5m4.5mWalgett Shire DCP 2016, s 4.3.1 Building Setbacks, table, row General Residential (R1)
Sideleft to the Building Code (0.9m)left to the Building Code (0.9m)Walgett Shire DCP 2016, s 4.3.1 Building Setbacks, table, row General Residential (R1)
Rearleft to the Building Code (0.9m)left to the Building Code (0.9m)Walgett Shire DCP 2016, s 4.3.1 Building Setbacks, table, row General Residential (R1)
Corner block, second street4.5m4.5mWalgett Shire DCP 2016, s 4.3.1 Building Setbacks, table, row General Residential (R1); s 4.7.1 Lot size

Which DCP applies to my block in Walgett?

It depends on where the lot is. Walgett Shire DCP 2016, s 4.3 and s 4.5 (R1 General Residential) is Walgett Council's main plan, and 5 other plans cover a granny flat on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.

Other plans in Walgett that cover a granny flat
PlanWhere it appliesFrontSideRearSecond street
Walgett Shire DCP 2016, s 4.3 and s 4.5 (RU5 Village)Land zoned RU5 Village: Collarenebri, Burren Junction, Carinda, Cumborah and Rowena (293 ha in five polygons; Lot Size Map 2,000 m2 and 700 m2).6mleft to the Building Code (0.9m)left to the Building Code (0.9m)6m
Walgett Shire DCP 2016, s 4.3 (RU1 Primary Production)Land zoned RU1 Primary Production (almost all of the shire; Lot Size Map 400 ha, with small 2,000 m2 and 2,500 m2 edge pieces).20m10m10m20m
Walgett Shire DCP 2016, s 4.5 (R5 Large Lot Residential)Land zoned R5 Large Lot Residential (21.7 ha in one polygon beside Carinda, Lot Size Map 1 ha).not set by the DCP: ask the councilnot set by the DCP: ask the councilnot set by the DCP: ask the councilnot set
Walgett Shire DCP 2016 (C4 Environmental Living, no setback figures)Land zoned C4 Environmental Living: the settlements of Gingie, Namoi and Walli, two near Walgett and one near Collarenebri (18.3 ha in three polygons, Lot Size Map 700 m2).not set by the DCP: ask the councilnot set by the DCP: ask the councilnot set by the DCP: ask the councilnot set
Walgett Shire DCP 2016 (E1 Local Centre, no setback figures)Land zoned E1 Local Centre: the main street centres of Walgett and Lightning Ridge (48.9 ha).not set by the DCP: ask the councilnot set by the DCP: ask the councilnot set by the DCP: ask the councilnot set

What are the complying development setbacks for a granny flat?

If you build a granny flat with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.

Complying development (CDC) setbacks for a granny flat on three example lots
Example lotFrontSideRearCorner block, second street
450m² (15m wide, 30m deep)4.5m0.9m (1.5m at two storeys)3m2m
600m² (15m wide, 40m deep)4.5m0.9m (1.5m at two storeys)3m2m
1,000m² (20m wide, 50m deep)6.5m1.5m5m3m

What if my block is on a corner?

Walgett Shire DCP 2016, s 4.3 and s 4.5 (R1 General Residential) sets a separate setback for a granny flat from the second street, the side street of a corner block: 4.5m (Walgett Shire DCP 2016, s 4.3.1 Building Setbacks, table, row General Residential (R1); s 4.7.1 Lot size). The complying development figure for the second street is in the CDC table above.

Does a two storey granny flat need bigger setbacks?

No. Walgett Shire DCP 2016, s 4.3 and s 4.5 (R1 General Residential) sets the same figures for a one or two storey granny flat. Under complying development, the two storey figures are in the CDC table above.

What else do people ask?

Can Walgett Council approve a granny flat closer to the boundary?

It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.

Do these setbacks apply to a shed, pool or fence in Walgett?

No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.

When were the setbacks on this page checked?

We last read Walgett Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.

Where does this information come from?

These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.

What else can I check?

Check what applies to your block