How close to the boundary can a granny flat be in Canterbury-Bankstown?
Canterbury-Bankstown Council's main plan, Canterbury-Bankstown DCP 2023, Chapter 5.1 (Former Bankstown LGA), asks a single storey granny flat for these setbacks: front 5.5m, side 0.9m and rear 0.9m.
In Canterbury-Bankstown the setbacks for a granny flat come from Canterbury-Bankstown Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the granny flat first.
NSW addresses only. Free, and no sign up.
What setbacks does Canterbury-Bankstown Council's main plan set for a granny flat?
The table gives Canterbury-Bankstown DCP 2023, Chapter 5.1 (Former Bankstown LGA)'s one and two storey figures and the clause each comes from. The plan covers this land: Residential accommodation within the former Bankstown local government area (Ch 5.1 s 1: "Chapter 5.1 of this DCP applies to residential accommodation within the former Bankstown Local Government Area.").
| Setback | One storey | Two storeys | Where in the plan |
|---|---|---|---|
| Front | 5.5m | 6.5m for the second storey only | CB DCP 2023, Ch 5.1, s 3, cl 3.9 |
| Side | 0.9m | 0.9m | CB DCP 2023, Ch 5.1, s 3, cl 3.11 and 3.12 |
| Rear | 0.9m | 0.9m | CB DCP 2023, Ch 5.1, s 3, cl 3.11 and 3.12 |
| Corner block, second street | 3m | 3m | CB DCP 2023, Ch 5.1, s 3, cl 3.10 |
Which DCP applies to my block in Canterbury-Bankstown?
It depends on where the lot is. Canterbury-Bankstown DCP 2023, Chapter 5.1 (Former Bankstown LGA) is Canterbury-Bankstown Council's main plan, and 6 other plans cover a granny flat on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Canterbury-Bankstown DCP 2023, Chapter 5.2 (Former Canterbury LGA) | Residential accommodation within the former Canterbury local government area (Ch 5.2 s 1: "Chapter 5.2 of this DCP applies to residential accommodation within the former Canterbury Local Government Area."). | the average of the neighbouring homes (4.5m on lots up to 900m²; 6.5m on lots up to 1,500m²; 10m on larger lots where there are none) | 0.9m, plus 0.25m for every metre of wall above 3.8m on lots up to 900m²; 1.5m, plus 0.25m for every metre of wall above 3.8m on lots up to 1,500m²; 2.5m, plus 0.25m for every metre of wall above 3.8m on larger lots | 5.1m on lots up to 900m²; 7.1m on lots up to 1,500m²; 12.1m on larger lots | 2m on lots up to 600m²; 3m on lots up to 1,500m²; 5m on larger lots |
| Canterbury-Bankstown DCP 2023, Chapter 6.2 Bankstown City Centre | All development on land within the Bankstown City Centre (Ch 6.2 s 1.1, Figure 1), including R2, R3, R4 and MU1 land; this chapter prevails over Ch 5.1 where inconsistent. | not set by the DCP: ask the council | 0.9m | the average of the neighbouring homes | not set |
| Canterbury-Bankstown DCP 2023, Chapter 6.3 Campsie Town Centre | All development on land within the Campsie Town Centre (Ch 6.3 s 1.1, Figure 2), including R2, R3, R4 and MU1 land; this chapter prevails over Ch 5.2 where inconsistent, and the other chapters continue to apply. | not set by the DCP: ask the council | 0.9m, plus 0.25m for every metre of wall above 3.8m on lots up to 900m²; 1.5m, plus 0.25m for every metre of wall above 3.8m on lots up to 1,500m²; 2.5m, plus 0.25m for every metre of wall above 3.8m on larger lots | the average of the neighbouring homes (5.1m on lots up to 900m²; 7.1m on lots up to 1,500m²; 12.1m on larger lots where there are none) | not set |
| Canterbury-Bankstown DCP 2023, Chapter 7.2 City West: Former Bass Hill Drive-In Theatre Site | Lots in the former Bass Hill Drive-In Theatre Site, Bass Hill, numbered in Ch 7.2 Figure 2g Development Master Plan and listed in Appendix 2 (site specific controls cl 2.18 to 2.26 within Section 2 Bass Hill Small Village Centre, which applies to land shown in Figure 2a). | not set by the DCP: ask the council | not set by the DCP: ask the council | not set by the DCP: ask the council | not set |
| Canterbury-Bankstown DCP 2023, Chapter 11.6 (Former Potts Hill Reservoirs Site, Potts Hill) | The Western Residential Precinct of the former Potts Hill Reservoirs site (Ch 11.6 s 1: "Chapter 11.6 of this DCP applies to the former Potts Hill Reservoir site, Potts Hill as shown in Figure 1. | 5.5m | 0.9m | 0.9m | 3m |
| Canterbury-Bankstown DCP 2023, Chapter 11.13 (Former WSU Campus, Milperra) | 2 and 2A Bullecourt Avenue, Milperra, the former Western Sydney University campus (Ch 11.13 s 1: "This chapter of the DCP applies to the subject site being the properties at 2 and 2A Bullecourt Avenue Milperra, formerly known as the Western Sydney University (WSU) campus at Milperra."; Lot 2 DP 1291984 and Lot 2 DP 101147). | 5.5m | 0.9m | 0.9m | 3m |
What are the complying development setbacks for a granny flat?
If you build a granny flat with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 1.5m | 5m | 3m |
What if my block is on a corner?
Canterbury-Bankstown DCP 2023, Chapter 5.1 (Former Bankstown LGA) sets a separate setback for a granny flat from the second street, the side street of a corner block: 3m (CB DCP 2023, Ch 5.1, s 3, cl 3.10). The complying development figure for the second street is in the CDC table above.
Does a two storey granny flat need bigger setbacks?
Yes, under Canterbury-Bankstown DCP 2023, Chapter 5.1 (Former Bankstown LGA): the front setback goes from 5.5m to 6.5m for the second storey only. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Canterbury-Bankstown Council approve a granny flat closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Canterbury-Bankstown?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Canterbury-Bankstown Council's plans on 11 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.