How close to the boundary can a duplex be in Narromine?
Narromine Council's main plan, Narromine DCP 2011, Chapter 5a Residential Development (Zone R1), asks a single storey duplex for these setbacks: front the average of the neighbouring homes (7.5m where there are none), side left to the Building Code (0.9m) and rear 4m.
In Narromine the setbacks for a duplex come from Narromine Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the duplex first.
NSW addresses only. Free, and no sign up.
What setbacks does Narromine Council's main plan set for a duplex?
The table gives Narromine DCP 2011, Chapter 5a Residential Development (Zone R1)'s one and two storey figures and the clause each comes from. The plan covers this land: Land zoned R1 General Residential: the towns of Narromine and Trangie and the Skypark estate at the Narromine Aerodrome.
| Setback | One storey | Two storeys | Where in the plan |
|---|---|---|---|
| Front | the average of the neighbouring homes (7.5m where there are none) | the average of the neighbouring homes (7.5m where there are none) | Chapter 5a Residential Development, Building Siting and Design, Setbacks, Acceptable Solutions table (p 4), Front |
| Side | left to the Building Code (0.9m) | 3m | Chapter 5a Residential Development, Building Siting and Design, Setbacks, Acceptable Solutions table (p 4), Side |
| Rear | 4m | 7m | Chapter 5a Residential Development, Building Siting and Design, Setbacks, Acceptable Solutions table (p 4), Rear |
| Corner block, second street | the average of the neighbouring homes (5m where there are none) | the average of the neighbouring homes (5m where there are none) | Chapter 5a Residential Development, Building Siting and Design, Setbacks, Acceptable Solutions table (p 4), Corner Allotment, Side |
Which DCP applies to my block in Narromine?
It depends on where the lot is. Narromine DCP 2011, Chapter 5a Residential Development (Zone R1) is Narromine Council's main plan, and 3 other plans cover a duplex on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Narromine DCP 2011, Chapter 5a, Tomingley (Zone RU5) | Land zoned RU5 Village, which in Narromine Shire is only the village of Tomingley. | 9m | 5m | 5m | not set |
| Narromine DCP 2011, Chapter 5c Rural Development (Zone RU1) | Land zoned RU1 Primary Production. | 50m | 40m | 40m | 50m |
| Narromine DCP 2011, Chapter 5d Commercial Development (Zone E1) | Land zoned E1 Local Centre (the Narromine and Trangie town centres). | not set by the DCP: ask the council | not set by the DCP: ask the council | not set by the DCP: ask the council | not set |
What are the complying development setbacks for a duplex?
If you build a duplex with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 0.9m (1.5m at two storeys) | 5m (12m at two storeys) | 3m |
What if my block is on a corner?
Narromine DCP 2011, Chapter 5a Residential Development (Zone R1) sets a separate setback for a duplex from the second street, the side street of a corner block: the average of the neighbouring homes (5m where there are none) (Chapter 5a Residential Development, Building Siting and Design, Setbacks, Acceptable Solutions table (p 4), Corner Allotment, Side). The complying development figure for the second street is in the CDC table above.
Does a two storey duplex need bigger setbacks?
Yes, under Narromine DCP 2011, Chapter 5a Residential Development (Zone R1): the side setback goes from left to the Building Code (0.9m) to 3m; the rear setback goes from 4m to 7m. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Narromine Council approve a duplex closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Narromine?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Narromine Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.