How close to the boundary can a duplex be in Gilgandra?
Gilgandra Council's main plan, Gilgandra DCP 2011, s 7.2 General residential housing (R1 and RU5), asks a single storey duplex for these setbacks: front at least 7.5m, or the street's established building line where that is further back; side left to the Building Code (0.9m); and rear left to the Building Code (0.9m).
In Gilgandra the setbacks for a duplex come from Gilgandra Council's development control plan (DCP), the council's own rules for the design of homes in its area, unless you build as complying development, which follows state rules instead. This page is a first look: enter your address and the Site Checker opens at the setbacks for your lot, with the duplex first.
NSW addresses only. Free, and no sign up.
What setbacks does Gilgandra Council's main plan set for a duplex?
The table gives Gilgandra DCP 2011, s 7.2 General residential housing (R1 and RU5)'s one and two storey figures and the clause each comes from. The plan covers this land: Land zoned R1 General Residential (Gilgandra town) and RU5 Village (Tooraweenah, Armatree and the other villages) under Gilgandra LEP 2011.
| Setback | One storey | Two storeys | Where in the plan |
|---|---|---|---|
| Front | at least 7.5m, or the street's established building line where that is further back | at least 7.5m, or the street's established building line where that is further back | Gilgandra DCP 2011, s 7.3; Gilgandra DCP 2011, s 7.2.4 Setbacks, Front setback (building line), Table 7-1 Minimum Front Setbacks (Local access street) and the established areas rule |
| Side | left to the Building Code (0.9m) | left to the Building Code (0.9m) | Gilgandra DCP 2011, s 7.3; Gilgandra DCP 2011, s 7.2.4 Setbacks, Side and rear setback |
| Rear | left to the Building Code (0.9m) | left to the Building Code (0.9m) | Gilgandra DCP 2011, s 7.3; Gilgandra DCP 2011, s 7.2.4 Setbacks, Side and rear setback |
| Corner block, second street | 7.5m | 7.5m | Gilgandra DCP 2011, s 7.3; Gilgandra DCP 2011, s 7.2.4 Setbacks, Table 7-1 Minimum Front Setbacks, Local access street, Minimum side setback to corner street |
Which DCP applies to my block in Gilgandra?
It depends on where the lot is. Gilgandra DCP 2011, s 7.2 General residential housing (R1 and RU5) is Gilgandra Council's main plan, and 2 other plans cover a duplex on particular land, such as a precinct, an estate, rural land or a former council area. Many councils have several plans, set by zone, estate, precinct or former council area, so enter your address and the Site Checker picks the plan that covers your lot. The table lists each plan with its one storey figures.
| Plan | Where it applies | Front | Side | Rear | Second street |
|---|---|---|---|---|---|
| Gilgandra DCP 2011, s 7.1 Rural dwellings (R5 Large Lot Residential) | Land zoned R5 Large Lot Residential under Gilgandra LEP 2011 (s 7.1.1). | 15m | 10m | 10m | 10m |
| Gilgandra DCP 2011, s 7.1 Rural dwellings (RU1 Primary Production) | Land zoned RU1 Primary Production under Gilgandra LEP 2011 (s 7.1.1). | 30m | 50m | 50m | 50m |
What are the complying development setbacks for a duplex?
If you build a duplex with a complying development certificate (CDC), the fast approval a private certifier can issue when a design meets the state's fixed standards, the setbacks come from the state codes, not from the council's DCP, and they depend on the lot's area and width. The table shows the complying development (CDC) figures the Site Checker uses for three example lots: 450m² (15m wide, 30m deep), 600m² (15m wide, 40m deep) and 1,000m² (20m wide, 50m deep). Your own lot's figures are in its report, and Can I use complying development on my block? explains which lots qualify.
| Example lot | Front | Side | Rear | Corner block, second street |
|---|---|---|---|---|
| 450m² (15m wide, 30m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 600m² (15m wide, 40m deep) | 4.5m | 0.9m (1.5m at two storeys) | 3m (8m at two storeys) | 2m |
| 1,000m² (20m wide, 50m deep) | 6.5m | 0.9m (1.5m at two storeys) | 5m (12m at two storeys) | 3m |
What if my block is on a corner?
Gilgandra DCP 2011, s 7.2 General residential housing (R1 and RU5) sets a separate setback for a duplex from the second street, the side street of a corner block: 7.5m (Gilgandra DCP 2011, s 7.3; Gilgandra DCP 2011, s 7.2.4 Setbacks, Table 7-1 Minimum Front Setbacks, Local access street, Minimum side setback to corner street). The complying development figure for the second street is in the CDC table above.
Does a two storey duplex need bigger setbacks?
No. Gilgandra DCP 2011, s 7.2 General residential housing (R1 and RU5) sets the same figures for a one or two storey duplex. Under complying development, the two storey figures are in the CDC table above.
What else do people ask?
Can Gilgandra Council approve a duplex closer to the boundary?
It can. A development application (DA) is assessed on its merits, so the council can accept less than its plan asks for where a design justifies it, or ask for more. A complying development certificate has no such room: the design meets the code's setbacks or it is not complying development.
Do these setbacks apply to a shed, pool or fence in Gilgandra?
No. Sheds, pergolas, carports, pools, decks and fences follow different rules (exempt development, which needs no approval when it meets them), and these pages do not cover them.
When were the setbacks on this page checked?
We last read Gilgandra Council's plans on 12 November 2026. Each figure names the clause it came from, and each plan links to the council's own document, so you can check it against the current version.
Where does this information come from?
These pages are a first look at the setbacks in each council's published development control plan and in the complying development codes, read from the documents linked on each page. They are not a section 10.7 planning certificate or a design check, and a council plan can change after we read it. Confirm anything you rely on with the council or a certifier before you buy, design or build. Nothing on this page replaces advice from your certifier, engineer, lawyer or your own designer.